共搜索到1891条信息，每页显示10条信息，共190页。用时：0小时0分1秒13毫秒
of the temperature gradients at the solid/liquid interface in the liquid. The positions of the thermocouples were measured after the quenching. Cooling water level (with the constant temperature) was always kept......
strength of the material. The dislocation density ρi generated before the CA process can be divided into two parts, including dislocations generated by quenching and the applied stress during... the initial yield strength of the material before the loading stage and the dislocation density caused by quenching, respectively. It should be indicated that ρ0 is assumed to be 0.05×1014 m-2......
that the as-quenched samples had undergone a few hours of natural aging, due to the time gap between solution-quenching treatment and the DSC run. The DSC runs were initiated from ambient temperature to 540 °C... of GP zones that are formed at room temperature immediately in quenching. The dissolution peak temperature is in agreement with the reported dissolution temperature range of 50-150 °C [17......
]. Changsha: Central South University, 2009. [42] KERTZ J E, GOUMA P I, BUCHHEIT R G. Localized corrosion susceptibility of Al-Li-Cu-Mg-Zn alloy AF/C458 to interrupted quenching from solutionizing......
to be reasonable, due to elimination of quenching as origin of distortion problem [11]. Additionally, non-heat treatable Al alloys have good corrosion resistance and formability. Good formability of Al......
and quenching structure of liquid Cu-Al alloys[J]. Journal of University of Science and Technology Beijing, 2005, 12(2): 155-159. (编辑 龙怀中) 基金项目:国家自然科学基金面上项目(51171211)；广东省教育部产学研结合重点项目(2011B090400......
annealed in vacuum at 723 K for about 10 ks to make hydrogen desorb from the specimens. After diffusion anneals in an electric muffle furnace followed by water quenching, a part of the specimen was cut......
extrusion at home and abroad in recent 15 years was given. Finally, based on the defects of the traditional cold bending and developed integration processes, a new extrusion-bending-quenching integration...[42-45] Fig. 8 Extrusion-bending-quenching integrative forming technology and device[42-45] 图9 在线淬火装置示意图 Fig. 9 Schematic diagram of on-line quenching device 在实际的挤压生产过程中,挤出型材在挤压出模口处受外力作用......
and high GFA over a wide range of compositions [4-7]. Previous investigations indicate that the densely packed atomic structures are always favorable for the formation of glassy phases upon quenching [4......
finish temperature (Af+ 60 °C) for 10 min, followed by water quenching to recover the residual strain (εr). 2.3 Electrochemical test Rectangular specimens with a surface area of 1 cm2 were moulded......
