共搜索到1891条信息，每页显示10条信息，共190页。用时：0小时0分0秒808毫秒
then subjected to the water quenching process. The homogenized AA2195 aluminum alloy mainly consists of the equiaxed grains with the size of ~150 μm, as shown in Fig. 1. To simulate the hot rolling process......
. The samples were solution treated at 530 °C for 80 min, followed by water quenching at room temperature. The error of temperature retained at ±2 °C during solution treatment. Meanwhile, the time used......
of rapid solidification for the AlSi20 alloy powders, the other is suddenly water quenching during holding the AlSi20/8009 aluminum alloy at high temperatures. Due to the fine grain characteristic of Si......
[J]. 金属热处理, 2018, 43(11): 20-25. LIU Yun, HUANG Ji-wu, DENG Ying, JIANG Fu-qing, WANG Ying-jun. Effects of combined additions of Sc and Zr on quenching sensitivity of Al-Zn-Mg alloy[J].Heat Treatment......
, SCHMIDT A. Simulation of quenching involved in induction hardening including mechanical effects [J]. Computational Materials Science, 2013, 79: 639-649. DOI: 10.1016/j.commatsci. 2013.06.058. [10......
of 22:1. After hot extrusion treatment (HET), they were subjected to solution treatment (ST) at 470 °C for 1 h, followed by quenching and aging at 120 °C for 24 h [27]. Hardness measurements were......
alloy (T4). Water quenching was performed to obtain a supersaturated solid solution favorable for the subsequent ES process. The ingots were extruded into bars of 20 mm in diameter at 400 °C under......
, the as-cast samples were exposed at 350 °C for 200 h, followed by water quenching at 60 °C to room temperature. The PMC and HPDC samples after thermal exposure were named as TEPMC and TEHPDC, respectively......
% and RWP=7.76% which are not as good as the results obtained with Amm2. This may be related to the quenching in water of the samples at 1073 K. Table 1 Crystal data and structural refinement parameters......
/Laves eutectic were the result of water quenching, as presented in Fig. 6. From the above analysis, it can be inferred that the IMT of d350 mm GH4151 ingot is situated between 1150 and 1160 °C......
