共搜索到1797条信息，每页显示10条信息，共180页。用时：0小时0分0秒810毫秒
. Microstructure characterization and mechanical properties of TiB2/TiAl in situ composite by induction skull melting process [J]. Materials Science and Engineering A, 2012, 532: 522-527. 冷却速率对含TiB2的TiAl合金凝固组织和力学性......
to 13×10-6 from 33×10-6 in the consumable electrode. At the slag-steel interface of high-frequency induction furnace, PARK et al [14] also found the similar phenomenon that [O]T in Fe-0.2%O alloy... produced in a vacuum-induction melting furnace under Ar atmosphere, and the chemical composition of ingots is shown in Table 1. The steel block of smaller size (1 to 1.5 cm3) was cut from the ingot......
by vacuum induction melting and electroslag remelting, and then quenched and tempered to obtain various strength levels. The as-received steel bar was first austenitizing at 960 °C for 3.5 h......
was carried out in an electromagnetic induction furnace from Ningbo Shenguang Electric Furnace Company Limited with the flowing argon. The microstructure of the rolled Mg5Gd before and after heat......
HEAs were prepared by gas atomization with the following steps. Firstly, the pure metals (Fe, Mn, Co, Cr and Ni) with high purity (≥99.9%) were melted at 1500 °C in an induction heated vacuum furnace......
be speculated that a coordinate bond has formed through the electron sharing between the amino group of spirulina and Yb3+. The possible reasons are as follows: due to the strong electric induction effect......
(specifically, the melt spinning method) consisted of an induction heating coil and a rotating Cu-wheel for cooling the sample. The samples were melted in a graphite crucible in an inert Ar atmosphere......
) with a nominal composition of Ni51Ti were prepared and then they was used for electrode induction melting gas atomization (EIGA) to produce the alloy powder with a nominal composition of Ni50.8Ti49.2......
by a vacuum induction gas atomisation (VIGA) process. The main chemical compositions of the developed 316L SS, pure Al (99.9%) and AlSi10Mg alloy powder reported on herein were determined......
): 1351-1358. [51] ZHOU S, DAI X, XIONG Z, et al. Influence of Al addition on microstructure and properties of Cu-Fe-based coatings by laser induction hybrid rapid cladding[J]. Journal of Materials......
