共搜索到15441条信息，每页显示10条信息，共1545页。用时：0小时0分0秒281毫秒
Effects of heat treatment on the microstructure and mechanical properties of ZA84 magnesium alloyMingbo Yang1,2), Liang Bai2), Fusheng Pan2), and Hongjun Hu1) 1) School of Materials Science...="ChDivSummary">The effects of heat treatment on the microstructure and mechanical properties of ZA84 (Mg-8Zn-4Al-0.25Mn) alloy were investigated. The results indicate that the as-cast microstructure......
Effects of Milling and Heat Treatment on the Synthesis of NiTi PowdersH Mostajabodaveh2,A Babakhani32. Faculty of Metallurgical and Materials Engineering, Semnan University3. Department of Materials... by a planetary ball mill in various times(0.5, 1, 2, 6, 20, 36, 54 and 120 h) and subsequent heat treatment in Ar atmosphere at 820 °C. Study of powders structure after milling and heat treatment was carried......
Effects of heat treatment on microstructure and mechanical properties of Mg-3Sn-1Mn magnesium alloy YANG Ming-bo1, 2, 3, QIN Cai-yuan1, PAN Fu-sheng3 1. Materials Science and Engineering College... Abstract: The effects of heat treatment on the microstructure and mechanical properties of Mg-3Sn-1Mn alloy were preliminarily investigated by using optical and electron microscopy, X-ray diffraction (XRD......
Effect of austenitization heat treatment on the magnetic properties of Fe-40wt%Ni-2wt%Mn alloyS. Buyukakkas,H. Aktas,S. Akturk摘 要:The effect of austenitization heat treatment on magnetic properties was examined by means of M?ssbauer spectroscopy on an Fe-40wt/Ni-2wt/Mn alloy. The morphology of the alloy was obtained by using scanning electron microscopy......
, Beijing, China) 摘要:This article investigated effects of degrees of deformation, heat treatment temperatures and holding times on the recrystallization behavior of directionally solidified DZ4 superalloy. The results showed that, recrystallization of DZ4 superalloy could take place during solution heat treatment after certain degrees of cold work and depths of recrystallization increased with increasing......
Synthesis of Sodium Beta Alumina Films by Heat Treatment of Sodium Aluminum Oxides池晨1,2,Hirokazu KATSUI2,Takashi GOTO21. Key Laboratory for Green Chemical Process of Ministry of Education,Chemical... synthesized by heat treatment of NaAl6O9.5and γ-NaA1O2 films at temperatures of 1 373-1 573 K.Single-phase γ-NaA1O2 and NaAl6O9.5 films were prepared by laser chemical vapor deposition at the deposition......
Trans. Nonferrous Met. Soc. China 22(2012) 2395-2401 Effect of heat treatment on microstructure and tensile strength of NiCoCrAl alloy sheet fabricated by EB-PVD SHI Guo-dong1, WANG Zhi1, WANG... was fabricated by electron beam physical vapor deposition technique and the effects of the heat treatment on the microstructure and tensile strength of the NiCoCrAl alloy sheet were investigated......
-deposition temperature and heat treatment were also investigated. By galvanostatic cell cycling the film anodes can deliver a steady specific capacity. The morphological changes cause the differences in capacity retention. After farther heat treatment, the film anodes present a better cycle performance, with a specific capacity of 314 mA?h/g after 100 cycles. This high capacity retention can be due to its......
Influence of Heat Treatment on Hardness of Fe-Base Hardfacing Layer Containing Multi-Alloy刘建华,张瑞军,张运坤,杨庆祥摘 要:The Influence of heat treatment on hardness of Fe-base hardfacing layer containing multi-alloy was studied. The results show that the hardfacing layers have higher tempering stability and secondary hardening property. After quenched at 860~1200......
Effect of rolling and heat treatment on microstructure and mechanical properties of Mg3.5Y0.8Ca0.4Zr alloy樊建锋1,2,3,陈志远1,2,3,马跃宇4,韩刚1,2,3,许并社1,2,3,董洪标1,2,31. Key Laboratory of Interface Science... and Engineering,Taiyuan University of Technology4. General Research Institute for Non-ferrous Metals摘 要:The effect of rolling and heat treatment on microstructure......
