共搜索到1674条信息，每页显示10条信息，共168页。用时：0小时0分1秒641毫秒
. The electrodes were made up of active material, acetylene black and polyvinylidene fluoride (PVDF) with a weight ratio of 8:1:1. Firstly, a slurry was obtained by mixing the materials in N......
of the Lower Permian Qixia Formation (Figure 5). There was evident slurry seepage corresponding horizons during drilling. In the Late Permian Dalong period, large-scale marine transgression occurred......
(Max. 0.03), Cr (12.5-14.5), Ni (Max. 0.6) and Fe balanced. The samples were ground with a sand paper of mesh up to 2500 grit and then finished in an oscillating polisher using an alundum slurry......
-xin, WANG Zheng-xing. Face stability analysis of large-diameter slurry shield-driven tunnels with linearly increasing undrained strength [J]. Tunnelling and Underground Space Technology, 2018, 78......
that filling the goaf with slurry mixed with ice grains can effectively solve the problems of high temperature thermal environment and solid waste in deep mine. WANG et al [14] investigated a cold load......
improves the ductility [9]. Different types of FRCC such as Ductal, engineered cementitious composites (ECC), Ducon, slurry infiltrated fiber reinforced concrete (SIFCON), etc, are classified under......
) for 3 min until a homogeneous slurry is obtained. The fibers are then slowly added to the wet mix and high speed mixing is prolonged until the fibers will disperse in the mix. In the case of flaw size......
, PAPINI M, SPELT J K. Erosion modeling in abrasive slurry jet micro-machining of brittle materials [J]. Journal of Manufacturing Processes, 2015, 17(1): 127-140. [9] KALIAZINE A, ESLAMIAN M, TRAN H N......
, the grinding speed was 56 r/min, and the grinding time was 72 h. The ground slurry was dried, and then 1.1 wt.% of synthetic rubber was added as a pressure-enhancing agent. Then, the powder was pressed......
and TRC. In this process, cement slurry was chiseled off to artificially expose the coarse aggregates. The chiseled depth △h of the existing concrete surface was controlled to between 2 and 4 mm......
