共搜索到1595条信息，每页显示10条信息，共160页。用时：0小时0分0秒792毫秒
of the curing reaction of an epoxy resin [J]. Thermochimica Acta, 1993, 228: 47-60. [17] FRIEDMAN H L. Kinetics of thermal decomposition of char-forming plastics from thermogravimetry: Application......
into epoxy resin for an electrochemical test. The test was conducted at 20°C in open air in a glass cell containing 350 mL of 3.5% NaCl solution by using a PARSTAT 2263 potentiostat/galvanostat (Princeton......
electrolyte. The Au electrode was cut into small pieces of 1 cm × 1 cm, then connected with an insulated copper wire and cast in acrylic resin. The exposed surface area was 1 cm2. Prior to experiments, all......
Corrosion test Rectangular specimens with a surface area of 1 cm2 were molded into epoxy resin for electrochemical tests. The test was conducted at 25 °C in open air, within a glass cell containing......
analysed quantitatively by atomic absorption technique. It was cut into small pieces of 1 cm × 1 cm × 1 cm, connected with a copper wire isolated with plastic and cast in acrylic resin, leaving exposed......
equilibration was embedded in epoxy resin, ground and polished using 9 μm and 3 μm diamond pastes. The sample was analyzed using light optical microscopy (LOM, Keyence VHX-S90BE, LOM) and electron......
was used. The alloy samples were firstly embedded in mounting epoxy resin leaving a working area of 1 cm2 and then were used as working electrodes. Also, a platinum sheet (with surface area of 1 cm2......
inclined anchor cables, a connector, and two locksets. As shown in Fig. 1, one side of the anchor cable is anchored by a resin anchoring cartridge in a stable stratum where the roof and the side rib......
composite sheets after final hot-rolling 2.2 Metallographic preparation Specimens (cut as shown in Fig. 1) were mounted in epoxy resin and prepared according to standard metallographic technique, i.e.......
through a computer software (Framework, Gamry, USA), while data analysis was carried out by Echem Analyst Software, Gamry, USA. Specimens were prepared by cutting and then mounted into epoxy resin. So......
