共搜索到19124条信息，每页显示10条信息，共1913页。用时：0小时0分0秒329毫秒
Tungsten Inert Gas Welding–Brazing of AZ31B Magnesium Alloy to TC4 Titanium AlloyChuan Xu,Guangmin Sheng,Hui Wang,Ke Feng,Xinjian YuanCollege of Materials Science and Engineering, Chongqing University摘 要:Tungsten inert gas(TIG) welding-brazing technology using Mg-based filler was developed to join AZ31 B Mg alloy to TC4 Ti alloy in a lap......
Effect of Titanium Content on Microstructure and Wear Resistance of Hardfacing Alloy杨可,JIANG Yongfeng,BAO YefengCollege of Mechanical and Electrical Engineering, Hohai University摘 要:The hardfacing alloys with different concentrations of titanium were deposited on carbon steel substrates by shielded metal arc welding, and the effect of titanium content......
Recrystallization behavior of Ti40 burn-resistant titanium alloy during hot working processYun-jin Lai1,2,She-wei Xin3,Ping-xiang Zhang1,3,Yong-qing Zhao3,Fan-jiao Ma1,2,Xiang-hong Liu2,Yong Feng21...-resistant titanium alloy yields important information related to the optimization of the microstructures and mechanical properties.关键词:......
间合金或四元中间合金等作为添加剂,对原料进行均匀化处理,并采用合理的熔化工艺,可获得成分均匀,满足要求的大规格TC18铸锭. 关键词:TC18钛合金铸锭；化学成分；均匀性 中图分类号:TG146.2 文献标志码:A Melting process of TC18 titanium alloy ingot QIAO Lu, CHEN... uniformity control of TC18 titanium alloy ingot, the influences of alloy elements adding mode and melting process parameters on chemical uniformity were studied. The results indicate that through evening......
Trans. Nonferrous Met. Soc. China 22(2012) s656-s660 Microforming of superplastic 5083 aluminum alloy Md. Abu Mowazzem HOSSAIN1, Sung-Tae HONG1, Kyu-Yeol PARK1, Young-Sang NA2 1. School of Mechanical...: The mechanical behavior of superplastic 5083 aluminum alloy during microforming process was investigated by finite element analysis. A micro V-groove die was modeled to analyze the effects of forming......
shape and low-cost titanium alloy parts. Key words: titanium alloy; Ti-6Al-4V; powder metallurgy; hot isostatic pressing; microstructure; property; near-net-shape 1 Introduction Titanium powder... of the near-net-shape process are performed to fabricate PM titanium parts.2 Experimental 2.1 Prealloying process The prealloying PM process of fabricating titanium alloy and parts is shown in Fig.1.......
Friction and Wear Behaviors of Ti/Cu/N Coatings on Titanium Alloy Surface by DC Magnetron Sputtering李军霞1,2,3,PANG Xiaoxu4,范爱兰3,ZHANG Huiqiao31. College of Mechanical Engineering, Taiyuan University... of Science and Technology摘 要:Ti/Cu/N coatings with different Cu contents were deposited on titanium alloy surface by the DC magnetron sputtering technique.XPS......
......
......
......
