共搜索到13592条信息，每页显示10条信息，共1360页。用时：0小时0分1秒233毫秒
. Multi-scale quantitative characterization of 3-D pore-fracture networks in bituminous and anthracite coals using FIB-SEM tomography and X-ray μ-CT [J]. Fuel, 2017, 209: 43-53. DOI: 10.1016/j...: the strain caused by the deformation of the coal sample after the impact load is applied and the observed displacement caused by translation and rotation of the sample. Since x direction is aligned......
IA, Hague R J M. Quantification and characterisation of porosity in selectively laser melted Al-Si10-Mg using X-ray computed tomography [J]. Materials Characterization, 2016, 111: 193-204. [8... pores were (47±16) μm, and their distances to the surface were (192±142) μm. These near-surface pores were formed at the end/beginning of a scan vector in the x-direction. The laser movement......
results from the Tafel polarization curve, EIS, SKP microscopy, SEM, and energy dispersive X-ray spectroscopy (EDS), the modified internal coating was analyzed and the anticorrosion effect of the GO... of the effect of hydrogen sulfide on the corrosion of X80 pipeline steel in saline solution [J]. Corrosion Science, 2016, 102: 455-468. DOI: 10.1016/j.corsci.2015.10.038. [9] GUAN X, ZHANG D, WANG J, JIN......
, using optical microscopy (OM) and scanning electron microscopy equipped with energy-dispersive X-ray spectroscopy (SEM-EDS). Metallographic samples were cut from the as-cast and heat-treated samples..., was carried out. Table 4 Tensile and rotating bending fatigue testing conditions (X=Performed, 0=Not performed) 3 Results and discussion 3.1 As-cast microstructure The microstructure of the as-cast......
出版社, 1984: 23. BRIGGS D. Handbook of X-ray and ultraviolet photoelectron spectroscopy[M]. GUI Lin-lin, HUANG Hui-zhong, GUO Guo-lin, transl. Beijing: Peking University Press, 1984: 23. [30] CHENG T C...Mastersizer 2000型激光粒度分析仪(英国马尔文公司)对反应产物进行粒度分析；采用JSM-6360LV型扫描电镜(日本JEOL公司)观察除铁渣与转型后赤铁矿渣的形貌；采用X射线衍射仪(XRD,Rigaku D/max-TTR III)分析样品物相(发光源为Cu Kα靶,管压为40 kV,管流为250 mA,λ=0.154056×10-10 m,2θ为10.0°~80.0°).对除铁后滤液......
. Finally, characterization of the joint zone was performed by X-ray elemental mapping and energy dispersive spectroscopy analysis (SEM/EDS) using a scanning electron microscope Philips XL30 ESEM provided......
), compression along RD (RD compression) and normal direction (ND compression) at 300 °C were studied by using optical microscopy (OM), X-ray diffractometry (XRD) and electron backscattered... the support from the Natural Sciences and Engineering Research Council of Canada (NSERC, RGPIN-2016-06464). References [1] CAO X Q, XU P P, FAN Q, WANG W X. Theoretical prediction of forming limit......
of Laves phase were measured by ImageJ software. 2.4 EDS analysis Energy dispersive X-ray spectroscopy (EDS) technique was used for qualitative and quantitative estimation of elemental composition... (ISRO), Department of Space, India, under ISRO RESPOND scheme (Project No. ISRO/RES/3/728/16-17). References [1] FU S H, DONG J X, ZHANG M C, XIE X S. Alloy design and development of Inconel 718 type......
in laboratory-scale experiments. In addition, the FeO content in the final slag does not exceed 0.05% analyzed by X-ray fluorescence, which illustrates that in the case of laboratory-scale experiment... inclusion from molten steel [J]. Metallurgical and Materials Transactions B, 2016, 47B (12): 3225-3230. [15] CHANG Z, SHI X F, CONG J Q. Study on mechanism of oxygen increase and countermeasure to control......
al. A pore morphological study of gas-atomized Ti-6Al-4V powders by scanning electron microscopy and synchrotron X-ray computed tomography[J]. Powder Technology, 2018, 330: 425-430. [22] GAO C F......
