共搜索到13198条信息，每页显示10条信息，共1320页。用时：0小时0分1秒432毫秒
] WAGNER F, GARCIA D E, KPUPP A, CLAUSSEN N. Interpenetrating Al2O3-TiAl3 alloys produced by reactive infiltration [J]. J Europ Ceram Soc, 1999, 19: 2449-2453. [4] PENG H X, WANG D Z, GENG L, YAO C K......
) that consists of γ-LiV2O5 and VO2 mainly. LVO was introduced as the cathode material of thermal cell with lithium alloys anode firstly in 1986[3]. It has more flat discharge profiles than γ-LiV2O5, VO2......
{ 1 2 1 5}<1 0 1 0>织构的钛板材的横向弹性模量为 1 1 6GPa, 大于轧向的弹性模量 (1 0 8GPa) 关键词: 六方金属板材;弹性;织构;极图;ODF; 中图分类号: TG113 收稿日期:1999-01-19 Calculation of elastic properties of metals and alloys......
and development of the technology using finite element (FE) modeling and simulation is of significance for manufacturing seamless ring-shaped components with high quality, low cost and short cycle. The current international level, remained problems and development trend of macro-scale and micro-scale FE modeling and simulation of hot ring rolling were reviewed, and the following prospects......
-C梯度过渡层(WCGC),采用热丝化学沉积法(HFCVD),以甲烷和氢气为反应气体,在基体表面生长金刚石膜.采用场发射扫描电子显微镜(FE-SEM),X射线衍射仪(XRD)和激光拉曼光谱(Raman)对W-C过渡层和金刚石膜进行检测分析,研究热丝辐射距离和沉积气压对WCGC与金刚石膜的的影响.结果表明:热丝辐射距离对金刚石薄膜和WCGC均有较大影响；WCGC过渡层能够在一定热丝辐射范围内降低Fe在...大挑战.WEI等[22-23]最近报道了通过W-C梯度过渡层阻碍金属粘结相Co的扩散,成功地在WC-Co硬质合金基体上沉积了高质量微米和纳米金刚石薄膜. Fe元素与Co元素对CVD金刚石生长具有十分类似的抑制作用.本文作者以高速钢为基体,采用反应磁控溅射技术在钢基上制备W-C梯度层作为中间过渡,试图利用该过渡层隔离钢基体中的Fe,从而阻碍钢基中Fe的石墨化作用和C在Fe中溶解和扩散,同时希望强碳型......
in a stationary air ambient, then SiO2 thin film was formed on the SiC structure. The SiCn/2618 composite was prepared via casting the liquid 2618 Al alloy (2.25% Cu, 1.60% Mg, 1.10% Fe, 1.15% Ni, 0.20... 25 November 2012 Abstract: The dry friction and wear behaviors of co-continuous composites SiC/Fe–40Cr against SiC/Al 2618 alloy were investigated on a ring-on-ring friction and wear tester at sliding......
alloys are widely used in the economy, particularly in the transportation, packaging and construction industries. Most aluminum melting is accomplished in large, natural-gas-fired furnaces. Although... surface. The temperature was measured by means of thermocouple NiCr-Ni and the major gas-phase species concentrations were detected by flue gas analyzer from Testo in one point at the end of the furnace......
on nanostructured coatings almost covered all the coating materials, including some soft film lubrication material, such as MoS2 [44], traditional hard metal coating material, such as Cr, Ni [45,46... characterization [J]. Journal of Alloys and Compounds, 2010, 495: 620-624. [53] PENKOV O V, PUKHA V E, ZUBAREV E N. Tribological properties of nanostructured DLC coatings deposited by C60 ion beam [J]. Tribology......
Letters, 2012, 89: 16-18. [41] HAO Y Z, YANG H, CHEN G H, ZHANG Q L. Microwave dielectric properties of Li2TiO3 ceramics doped with LiF for LTCC applications[J]. Journal of Alloys and Compounds, 2013......
, 16: 1530-1540. [7] RATS D, VANDENBULCKE L, HERBIN R, BENOIT R, ERRE R, SERIN V, SEVELY J. Characterization of diamond films deposited on titanium and its alloys [J]. Thin Solid Films, 1995, 270......
