共搜索到1126条信息，每页显示10条信息，共113页。用时：0小时0分0秒844毫秒
the particles appear as spindles or rods. Aspect ratio is expressed as the ratio of the minimum FERET diameter (Fmin) to the maximum FERET diameter (Fmax), which can be written as: ......
printing system, Studio SystemTM, which claims to be the most affordable and simplest 3D printer [29] in the market. Studio SystemTM works by extruding bound metal rods (metal powder held together by wax......
into a steel mold with a diameter of 85 mm and a height of 100 mm at 700 °C. The ingots were extruded into the alloy rods with a diameter of 16 mm at 340-360 °C......
casting. After homogenisation treatment at 400 °C, the ingot was extruded directly into rods at 360 °C with a diameter of 20 mm by a vacuum extruder (Dorst-V15, Germany). The specimens......
extruded into rods at 350 °C with an extrusion ratio of 25, and the extrusion speed was 2 m/min. The mechanical properties of the as-extruded samples were evaluated by tensile tests at room......
, ALI A, AHMAD N, et al. Synthesis and characterization of CuO rods for enhanced visible light driven dye degradation[J]. Journal of Nanoscience and Nanotechnology, 2020, 20(12): 7716-7723. [6] TASLEEM S......
at the top of the pile, and the bottom of the pile is connected by link rods. Figure 3 Horizontal displacement calculation of single pile According to the calculation formula of elastic foundation beam......
of the tool probe and is forged by the intimate contact of the tool shoulder and the pin profile. As a result of this process, a joint is produced in "solid state" [13]. Fig. 1 Parts of FSW tool [12......
[7-13]. Three distinct zones forming the final nugget zone in FSW are: forged zone affected by the shoulder or axial force, shear zone influenced by the pin, and swirl zone affected by the bottom......
. 24 TEM images of cold forged sample and samples under different treatments[45] 图25 Cu-0.23%Al2O3弥散强化铜合金超低温变形80%后EBSD晶粒取向成像图(a)及不同温度下变形前后织构体积分数的变化(b)[46] Fig. 25 EBSD grain......
