共搜索到10509条信息，每页显示10条信息，共1051页。用时：0小时0分0秒838毫秒
. After physical feasible screening in Section 2, totally 12312 configurations are left for further screening. All the dynamics characteristic matrix can be written automatically. After obtaining A*, all......
, and the results will be discussed in Section 3.4. Figure 6 Activation energy E of soot with different ageing time 3.3 Effect of thermal ageing oxygen concentration on soot oxidation performance Figure 7......
the 54th node of the axial angle. It can be seen from Section 3 that the axial angle is equally divided into 72 nodes. Therefore, as shown in Figure 6(b), the range of the maximum pressure of the oil......
轴多晶组织. 图4 不同变形温度及应变速率下压缩后CG Cu70.8Al18.6Mn10.6 SMA试样中部纵截面金相组织 Fig. 4 Metallographic structures of central longitudinal section of CG Cu70.8Al18.6Mn10.6 SMA samples after compression......
, the phase, surface and cross-sectional morphologies of scales formed were characterized using D/Max-2500 pc type X-ray diffraction (XRD) and Camscan MX2600FE type scanning electron microscopy..., which shows that the scale on Alloy 1 is mainly composed of Cr2O3 and Al2O3. Figure 5 shows the cross-sectional SEM images of Alloy 1 after isothermal oxidation at 900 °C for 100 h in air......
and total Fe, in the samples were measured, using atomic absorption spectroscopy (AAS). To keep the volume of the culture constant, an equal volume of 9K medium was added after taking each sample......
. 图3 羊拉铜矿床3100 m中段18#穿脉铅锌矿体素描图 Fig. 3 Drawing of lead- zinc ore body in No.18# cross vein at 3100 m level tunnel, Yangla copper deposit 铜矿体上部为弱方解石化,下部为强方解石化(见图3中蓝色虚线所示),铅锌矿体具强方解石化；铅锌矿体分布于铜矿......
oxides In 1977, HORKANS et al [108] reported that an IrO2 multicrystalline electrode showed distinct CV current peaks in 1 mol/L H2SO4, and it achieved approximately equal anodic and cathodic charges......
4中(a),(b)和(c)所示分别为MoldSDM模具制造工序,该工艺制备 的蜡模和采用该工艺与凝胶注模结合制备的不锈钢叶轮. 图4 MoldSDM模具制造工序[65] Fig.4 Processing steps for MoldSDM (a), section of wax mold(b)and stainless steel impeller(c... of cross-linked chitosan-alumina suspensions used for a new gelcasting process[J]. Journal of the American Ceramic Society, 2002, 85(7): 1699?1705. [36] LYCKFELDT O, BRAND J, LESCA S. Protein......
硫,蠕变性能的变化主要是由于沿晶界择优硫化而造成的. 表6 IN738LC合金在850℃,307MPa蠕变过程中表面腐蚀深度 [6] Table 6 Measured and calculated corrosion depth in load bearing section for IN738LC alloy crept at and 307MPa ......
