共搜索到1108条信息，每页显示10条信息，共111页。用时：0小时0分0秒783毫秒
thickness of 11.37 μm, is 29.36 GPa. The erosion and salt spray resistance performance of Cr17Ni2 steel substrates can be evidently improved by Ti/TiN/Zr/ZrN multilayer coating. The surface roughness of Cr17Ni2 steel substrates plays an important role in determining the mechanical and erosion performances of Ti/TiN/Zr/ZrN multilayer coatings. Overall, a low value of the surface roughness of substrates......
. 关键词:Cu-Cr-Zr合金；液固两相流；冲蚀磨损性能；变形率 中图分类号:TG 146.1; TG 172 文献标识码:A Erosion wear behavior of Cu-Cr-Zr alloy in liquid-solid two-phase flow LIU Yong1, LONG..., Shanghai Jiao Tong University, Shanghai 200030, China) Abstract: Using MCF-30 erosion wear resistance testing machine, the liquid-solid two-phase flow erosion wear test of Cu-Cr-Zr alloy contact wire......
Experimental studies on the erosion rate of different heat treated carbon steel economiser tubes of power boilers by fly ash particlesT.A.Daniel Sagayaraj,S.Suresh,M.Chandrasekar摘 要:The experimental investigations on the effect of the fly ash particle size,velocity,impingement angle,and feed rate were done with an emphasis on the effect of erosion......
. Influence of operation numbers on arc erosion behavior of Ag/ZnO electrical contact materials[J]. The Chinese Journal of Nonferrous Metals, 2021, 31(5): 1285-1298. DOI: 10.11817/j.ysxb.1004.0609.2021-39771 银...(见图3)对Ag/ZnO(10)电触头材料进行通断试验,此装置可以采集每次通断试验中的电弧能量,电弧时间,熔焊力,温度和接触电阻等参数.表2所列为电弧侵蚀试验条件参数. 表2 电弧侵蚀试验条件参数 Table 2 Parameters of arc erosion test conditions 1.3 分析测试手段 本实验采用电子天平测量电触头质量损失,该天......
......
and erosion wear of the composite coating were investigated by thermal shock test,anti-oxidative test,abrasive wear test and erosion wear test. The results show that the coating is dense and has high bonding... oxidation resistance and wear resistance. Compared with the base of pure copper, the oxidation resistance, abrasive wear and erosion wear of the coating are improved by 3.14, 6.16 and 7.48 times......
characteristics of the macro-arc oxidation (MAO) coating on Mg alloy AZ91 were examined by means of nano scratch tester. The corrosion and erosion corrosion behavior of AZ91 with and without MAO coating were investigated by using potentiodynamic electrochemical technique and micro-abrasion tribometer in simulated body fluids, respectively. The influence of HCO3- ions on the erosion corrosion......
The Erosion Effect of Kapton Film in a Ground-based Atomic Oxygen Irradiation Simulator王海斗1,MA Guozheng1,XU Binshi1,XING Zhiguo1,LI Guolu2,ZHANG Sen21. National Key Laboratory for Remanufacturing, Academy of Armored Forces Engineering2. School of Materials Science and Engineering, Hebei University of Technology摘 要:In order to investigate the effect......
体的侵蚀. 图2 熔炼T2Ni合金后BZY坩埚侵蚀层照片 Fig. 2 Macro-picture of erosion layer of BZY crucible after melting Ti2Ni alloy 图3所示为熔炼前后坩埚内壁的SEM像.从图3(a)可看出,熔炼合金前,BZ坩埚内壁晶界结构完整,有少量气孔分布在晶粒之间.相比BZ坩埚,熔炼前的BZY坩埚晶...]. Mater Trans, 2008, 49(2): 289-293. Stability of Y-doped BaZrO3 and its erosion resistance of titanium melts KANG Ju-yun1, CHEN Guang-yao2, LAN Bao-bao1, LI Bao-tong1, LU Xiong-gang1, 3, LI Chong-he1, 3......
J. Cent. South Univ. (2019) 26: 196-206 DOI: https://doi.org/10.1007/s11771-019-3993-y Bending performance of TRC-strengthened RC beams with secondary load under chloride erosion YU Yu-lin(余玉琳)1...; secondary load; sustained load corrosion Cite this article as: YU Yu-lin, YIN Shi-ping, NA Ming-wang. Bending performance of TRC-strengthened RC beams with secondary load under chloride erosion [J......
