共搜索到21310条信息,每页显示10条信息,共2131页。用时:0小时0分2秒124毫秒
Feasibility of semi-solid die casting of ADC12 aluminum alloy S. JANUDOM1, T. RATTANOCHAIKUL1, R. BURAPA2, S. WISUTMETHANGOON3, J. WANNASIN1 1. Department of Mining and Materials Engineering... June 2010 Abstract: The feasibility of semi-solid die casting of ADC12 aluminum alloy was studied. The effects of plunger speed, gate thickness, and solid fraction of the slurry on the defects were......
......
TEM study on microstructures and properties of 7050 aluminum alloy during thermal exposure SHEN Kai(沈 凯)1 , CHEN Jin-ling(陈金灵)1, YIN Zhi-min(尹志民)2 1. School of Materials Science and Technology...; Abstract: The microstructures of 7050 aluminum alloy under different thermal exposure conditions were investigated by means of transmission electron microscopy (TEM), high resolution......
s......
ARTIFICIAL NEURAL NETWORK MODEL OF CONSTITUTIVE RELATIONSHIP FOR 2A70 ALUMINUM ALLOY Y.Y. Yang1,Y. Lu1,D.B. Shan1,F. Liu1 (1.School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China) Abstract:The hot deformation behavior of 2A70 aluminum alloy was investigated by means of isothermal compression tests performed on a Gleeble-1500 thermal simulator over......
J. Cent. South Univ. Technol. (2007)04-0456-04 DOI: 10.1007/s11771-007-0089-x Modeling effects of constituents and dispersoids on tensile ductility of aluminum alloy SONG Min(宋 旼...) ____________________________________________________________________ Abstract: The modeling effects of constituents and dispersoids on the tensile ductility of aluminum alloy were studied. The results show that the tensile ductility decreases with the increase......
Evolution of microstructure in semi-solid slurries of rheocast aluminum alloy R. CANYOOK1, S. PETSUT1, S. WISUTMETHANGOON2, M. C. FLEMINGS3, J. WANNASIN1 1. Department of Mining and Materials... of the slurry at the desired time. Samples of semi-solid 356 aluminum alloy were taken at different gas injection times of 1, 5, 10, 15, 20, 30, 35, 40, and 45 s. Analysis of the microstructure......
Calculation of cooling rate of amorphous aluminum alloy melt-spun ribbons HE Shi-wen (何世文), LIU Yong(刘 咏), LIU Zu-ming(刘祖铭), HUANG Bai-yun(黄伯云) State Key Laboratory of Powder Metallurgy... If we substitute the thermophysical properties in Table 1 into Eqn.(9), then Ti=626.74 K. And we substitute Ti=626.74 K into Eqn.(4), then the temperature field of aluminum alloy ribbon is  ......
......
Accelerated corrosion test and corrosion failure distribution model of aircraft structural aluminum alloy LIU Wen-lin(柳文林)1, MU Zhi-tao(穆志韬)2, JIN Ping(金 平)2, 3 1. Airborne Vehicle... of aircraft aluminum alloy, the statistical analysis was conducted by Gumbel, Normal and two parameters Weibull distribution function. The results show that aluminum alloy structural member has the corrosion......