共搜索到22616条信息，每页显示10条信息，共2262页。用时：0小时0分0秒609毫秒
......
Optimization of processing parameters for rheo-casting AZ91D magnesium alloy WANG Ya-bao(王亚宝), XU Jun(徐 骏), YANG Bi-cheng(杨必成), ZHANG Zhi-feng(张志峰) General Research Institute..., and the shape factor highly depends on the shearing temperature. The optimized rheo-casting processing parameters are 650 ℃ for pouring temperature, 585 ℃ for shearing temperature, 40 s for shearing time......
, to a great degree, restricts the application and extension of the electropolishing technology. The effect of processing parameters on nitinol electropolishing was explored. Besides the electrolyte, other... a near sigmoidal law. The practical spacing between anode and cathode is confirmed by the Hall bath experiment. Key words: NiTi alloy; nitinol; electropolishing; processing parameters 1 Introduction......
Optimization of processing parameters for preparation of Al-3Ti-1B grain refiner LI Bao(李 豹)1, WANG Hong-wei(王宏伟)1, ZHAO Rui-feng(赵瑞峰)2, WEI Zun-jie(魏尊杰)1 1. School of Materials Science... alloys were prepared at different processing parameters by the reaction of halide salts, and the grain refining response of Al-7Si alloy was investigated with Al-3Ti-B master alloy. The microstructure......
Processing parameters for Cu nanopowders prepared by anodic arc plasma WEI Zhi-qiang(魏智强)1, 2, XIA Tian-dong(夏天东)2, MA Jun(马 军)1, FENG Wang-jun(冯旺军)1, DAI Jian-feng(戴剑锋)1, WANG Qing(王 青)1, YAN... by anodic arc discharging plasma method with home-made experimental apparatus. The effects of various processing parameters on the particle size of Cu nanopowders were investigated in the process......
Influence of processing parameters on coating surface roughness of aluminum alloy PAN Ming-qiang(潘明强), CHI Guan-xin(迟关心), WEI Dong-bo(韦东波), DI Shi-chun(狄士春) School of Mechatronics...; Abstract: The influence of processing parameters on the coating surface roughness of LD10 aluminum alloy......
Influence of processing parameters on microstructure and wear resistance of Ti+TiC laser clad layer on titanium alloy WU Wan-liang(武万良), SUN Jian-feng(孙俭峰), DONG Sheng-min(董胜敏), LIU Rong-xiang(刘荣祥... experiments were carried out on Ti-6Al-4V alloy with Ti+33%TiC(volume fraction) powders. Laser processing parameters were studied systematically to investigate the influences on the surface quality......
Influence of processing parameters and heat treatment on phase composition and microstructure of plasma sprayed hydroxyapatite coatings ZHAO Guo-liang(赵国亮)1, WEN Guang-wu(温广武)1, WU Kun... means for increasing the crystallinity and improvement in microstructure of as-sprayed HA coatings. Key words: hydroxyapatite coatings; plasma spraying; processing parameters; heat treatment ......
of Education, Abstract:The processing parameters of Mg-10Gd-4.8Y-0.6Zr magnesium alloy were investigated. The tests were carried out in the strain rate range of 0.001-1 s-1 and temperature range of 623-773 K... parameters were the temperature range of 723-773 K and the strain rate range of 0.1-1 s-1.Key words:Mg-10Gd-4.8Y-0.6Zr; hot compression; processing maps; processing parameters......
J. Cent. South Univ. (2021) 28: 338-350 DOI: https://doi.org/10.1007/s11771-021-4606-0 Effect of processing parameters on flow behaviors and microstructure during high temperature deformation...; processing maps Cite this article as: LUO Jiao, LI Xiang-yang, LI Cong, LI Miao-quan. Effect of processing parameters on flow behaviors and microstructure during high temperature deformation......
