共搜索到10553条信息，每页显示10条信息，共1056页。用时：0小时0分0秒505毫秒
In-situ fabrication of Al(Zn)-Al2O3 graded composite using the aluminothermic reaction during hot pressingS.M.A.Haghi,S.A.Sajjadi,A.BabakhaniDepartment of Materials Science and Engineering... was investigated. Al and Zn O powders were milled by a planetary ball mill, after which five-layer functionally graded samples were produced through hot pressing at 580°C and 90 MPa pressure for 30 min......
Microstructure of a Ni Matrix Composite Coating Reinforced by In-situ TiC Particles Using Plasma Cladding LIN Ping-hua1,WANG Ze-hua1,WU Yu-ping1 (1.Department of Material Sciences and Engineering... of 1000Hv0.1. 关键词:plasma cladding; in-situ synthesis; microsttucture; composite coating; TiC particle; [全文内容正在添加中] ......
......
......
of in-situ PEO-LiClO4-TiO2
composite polymer electrolyte
PAN Chun-yue(潘春跃), FENG Qing(冯 庆), WANG Li-jun(王丽君),
ZHANG Qian(张 倩), CHAO Meng(巢 猛)
(School of Chemistry and Chemical Engineering... is obtained at 5% mass fraction of TiO2.
Key words: polyethylene oxide (PEO); TiO2; composite polymer electrolyte; in-situ composite; conductivity
......利用高频磁场制备自生梯度复合材料的熔体温度选择
来源： 《中国有色金属学报2004年第6期》——李赤枫 王俊 疏达 李克 孙宝德
Microstructure and Tribological Properties of In-situ Synthesized TiB2- TiC/Ni Based Composite Coating by Laser Cladding SUN Rong-lu1,YANG Xian-jin2,TANG Ying1 (1.Laser Technology Institute... was prepared on TC4 alloy surface by chemical reaction among Ti, B and C elements using laser cladding technique. Microstructural analysis showed that the sizes of in-situ synthesized TiB2 and TiC particles......
In-Situ Synthesis of AlN Powders and Composite AlN Powders with Yttrium Addition 周美玲1,李春国2,林志浪1,郑新和3,王群1 (1.School of Material Sciences and Engineering, Beijing Polytechnic University, Beijing... and nitrogen as gas reactants, AlN powders and composite AlN powders by in-situ synthesis method were prepared. AlN lumps prepared by the nitriding of Al-Mg and Al-Mg-Y alloys have porous microstructure......
Science and Engineering, Dalian Jiaotong University, Dalian 116028, China) Abstract: The strength of the deformation-processed Cu-Fe in-situ composite was conducted by material test system(MTS... by geometrical necessary dislocation model and interface as dislocation source model. Key words: deformation-processed; Cu-Fe in-situ composite; strength CLC number: TB323 ......
......
