共搜索到34816条信息，每页显示10条信息，共3482页。用时：0小时0分0秒566毫秒
Characterization of Ti-50%Al composite powder synthesized by high energy ball millingFANG Wen-bin, LI Xue-wen, SUN Hong-fei, DING Yong-feng(School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China)Abstract:The Ti-50%Al (molar fraction) composite powder was synthesized by high energy ball milling (HEBM). The characteristics of the composite particles......
Lithium-ion full cell with high energy density using nickel-rich LiNi0.8Co0.1Mn0.1O2 cathode and SiO-C composite anodeAzhar Iqbal,Long Chen,Yong Chen,Yu-xian Gao,Fang Chen,Dao-cong LiInstitute of Engineering Research, Hefei Guoxuan High-Tech Power Energy CO., Ltd摘 要:A high-energy-density Li-ion battery with excellent rate capability and long cycle life......
J. Cent. South Univ. (2020) 27: 3053-3062 DOI: https://doi.org/10.1007/s11771-020-4528-2 Strength and energy exchange of deep sandstone under high hydraulic conditions LI Fei(李飞)1, 2, YOU Shuang(由爽... the process of rock deformation and failure, the stress thresholds of the rock are obtained. The change trend of total energy density, elastic energy density and dissipated energy density of deep......
Heidelberg 2011 Abstract: To further test whether polynitriprismanes are capable of being potential high energy density materials (HEDMs), extensive theoretical calculations were carried out... of PNNPs. The computed BDE for cleavage of C-C bond (88.5 kJ/mol) further demonstrates that only the hexa-nitrotriprismane can be considered to be the target of HEDMs. Key words: high energy density......
and swell after sintering. The forming ability of HVC lies on impact energy and powder filling amount simultaneously. Therefore, mass energy density can characterize the green density achieved at different powder filling amount and impact energy. For pure Ti powder, the green relative density is 96.0% when the mass energy density is 118 J/g. Key words: Ti powder; high velocity compaction......
="ChDivSummary">Practical applications of lithium-ion batteries(LIBs) with both high energy and power density are urgently demanded,which require suitable charge/discharge platform,fast charge-transfer...Realizing simultaneously enhanced energy and power density fullcell construction using mixed hard carbon/Li4Ti5O12 electrodeShi-Fei Huang1,Yao Lv1,Da Tie1,Yang Yu1,Yu-Feng Zhao1,21. State Key......
J. Cent. South Univ. Technol. (2008) 15(s1): 067-071 DOI: 10.1007/s11771-008-316-0 Effect of substrates on crystallization of high density polyethylene FAN Yu-run(范毓润), LIN Yuan(林 渊), RUAN Mian... of the substrates on the isothermal crystallization rate of a high density polyethylene(HDPE) were presented. Two methods were used to characterize the crystallization rate: the change of turbidity of the HDPE......
of more than 300 ℃[2]. The slow kinetics may be explained by the high energy barrier to be overcome[3] to dissociate the H2 molecule due to the tendency of Mg to repel the s electron of H because... chemisorption. 2) The energy barrier for hydrogen dissociation is high on the pure Mg surface (1.08 eV) and it is small (0.101 eV) when Fe is used as dopant due to the strong interaction between......
, the energy consumption, strain rate and dynamic strength were analyzed. And the fragmentation behaviors of specimens were investigated. The experimental results show that the energy consumption density of rock increases linearly with the total incident energy. The energy consumption density is of an exponent relationship with the average size of rock fragments. The higher the energy consumption density......
of pyrite were theoretically investigated and fully discussed by performing density functional theory (DFT). The calculated incorporation energy shows that gold would most likely exist in pyrite via... minimization, the pulay density mixing method was employed at a convergence tolerance of 2.0×10-6 eV/atom. The convergence criteria for structure optimization and energy calculation were set to 1......
