共搜索到4991条信息,每页显示10条信息,共500页。用时:0小时0分0秒540毫秒
Technology of centrifugal casting for titanium alloyTIAN Jing(田 竞), XIAO Shu-long(肖树龙),CHEN Yu-yong(陈玉勇), CHEN Zi-yong(陈子勇)(National Key Laboratory for Precision Hot Processing of Metals, School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China)Abstract:The investment technologies of preparing wax moulds, mould shells and technology of centrifugal casting......
Microstructural characteristics and properties in centrifugal casting of SiCp/Zl104 composite WANG Kai(王 开)1, 2, XUE Han-song(薛寒松)1, ZOU Mao-hua(邹茂华)1, LIU Chang-ming(刘昌明)1 1. College...; Abstract: The microstructural characteristics and Brinell hardness of a cylinder produced by centrifugal casting were investigated using 20% (volume fraction) SiCp/Zl104 composites......
......
......
aspect ratio (ratio of flow length to diameter). A micro precision casting technology based on investment casting using centrifugal method was investigated. The micro parts of Zn-4%Al alloy with an aspect... the gypsum, mold is sintered. During this process the master is lost by melting and pyrolysis. The preheated gypsum mold is then filled with a metal melt by centrifugal or pressure casting. After removing......
......
Numerical simulation and experimental investigation of two filling methods in vertical centrifugal casting WU Shi-ping(吴士平)1, LI Chang-yun(历长云)1, GUO Jing-jie(郭景杰)1, SU Yan-qing (苏彦庆)1,LEI Xiu... defects. Key words: titanium alloy; vertical centrifugal casting; hydraulic simulation; numerical simulation; top filling; bottom filling 1 Introduction Titanium alloys possesses a high......
......
Characteristics of two Al based functionally gradient composites reinforced by primary Si particles and Si/in situ Mg2Si particles in centrifugal casting ZHAI Yan-bo(翟彦博), LIU Chang-ming(刘昌明... functionally gradient composite tubes reinforced by primary Si particles alone and primary Si/ in situ Mg2Si particles jointly were successfully prepared by centrifugal casting, and their structural......
to describe the filling and solidification of TiAl melt by permanent mold centrifugal casting. The model was solved numerically and the filling and solidification processes in the centrifugal field were...]. However, for centrifugal casting TiAl valves, the horizontal cavity is a certain distance away from the vertical axis and rotates round it, which leads to an entirely different filling......