共搜索到18620条信息，每页显示10条信息，共1862页。用时：0小时0分0秒288毫秒
%. 表1 Rene88DT粉末的名义化学成分 Table1 Chemical compositions of Rene88DT powder alloy (mass fraction, %) 将激光快速成形的试样进行1 160 ℃,2 h,200 MPa的热等静压工艺(为粉末冶金制备Rene88DT高温合金零件中常用工艺)HIP处理,然后采用1 160 ℃,2 h,空...文章编号:1004-0609(2008)08-1446-07 激光快速成形Rene88DT高温合金的热等静压处理 赵晓明,林 鑫,陈 静,黄卫东 (西北工业大学 凝固技术国家重点实验室,西安 710072) 摘 要:采用金相分析,扫描电镜分析,拉伸实验等方法研究热等静压(HIP)处理对激光快速成形Rene88DT粉末盘用高温合金裂纹和力学性能的影响.结......
Hot workability characteristics of Rene88DT superalloy with directionally solidified microstructureFu-Lin Li,Rui Fu,Di Feng,Zhi-Ling TianSuperalloy Department, Central Iron & Steel Research Institute... directionally solidification(ESR-CDSò) were studied in the temperature range of 1,040–1,140 °C and strain rate range of 0.001–1.000 s-1by hot compression tests. Flow curves for Rene88 DT alloy......
激光立体成形Rene88DT高温合金γ′相的高温粗化行为研究赵晓明1,2,巩水利2,林鑫1,陈静1,黄卫东11. 西北工业大学 凝固技术国家重点实验室2. 中航工业北京航空制造工程研究所 高能束流加工技术国防科技重点实验室摘 要:采用激光立体成形技术(LSF)制备Rene88DT高温合金,对其在760~840℃温度区间进行高温短时(4~16h)时效处理,采用微观测试分析方法对高温短时时效处理后γ′相形态,尺寸变化及粗化动力学行为进行了研究.结果表明:激光立体成形Rene88DT高温合金在高温短时时效条件下,γ′相分布均匀,形态基本为球形,时效温度对γ′相的影响比时效时间更为显著;γ′相的粗化规律符合Lifshitz-Slyozov-Wagner(LSW)理论,γ′粗化激活能Q=211.65kJ/mol......
The Strengthening of Cu-15Ni-8Sn Alloy WANG Ming-Pu1,WANG Yan-hui1,HONG Bin1 (1.School of Material Science and Engineering, Central South University, Changsha China) 摘要:The microstructure, property and relation between them of Cu-15Ni-8Sn alloy are studied by means of TEM and the measurement of hardness. The results show that γ '' metastable phase strengthens alloy because of its ordering......
The Technological Improvements of Aluminum Alloy Coloring by Electrolysis LI Nai-jun1 (1.Teachers College, Shenyang University, Shenyang 110015, P. R. China) 摘要:The technological process of coloring golden-tawny on aluminum alloy by electrolysis was improved in this paper. The optimum composition of electrolyte was found, the conditions of deposition and anodic oxidation by electrolysis were......
Microstructure and Performances of Nanocrystalline Zinc-nickel Alloy Coatings LI Guang-yu1,NIU Li-yuan1,JIANG Zhong-hao1,LIAN Jian-she1 (1.The Key Lab of Automobile Materials, Ministry of Education, China, College of Materials Science and Engineering, Jilin University, Nanling Campus, Changchun, 130025, China) 摘要:Nanocrystalline zinc-nickel alloy coatings were deposited from an alkaline......
Alloy 20不锈钢薄板等离子弧焊接工艺研究赵斌,王宾宾,王小华中国船舶重工集团公司第七二五研究所摘 要:对Alloy 20不锈钢薄板进行了等离子弧焊接工艺试验研究.结果表明,采用等离子弧焊接方法,ERCr Ni Mo-3焊材及合理的焊接工艺参数,等离子弧焊接工艺可用于Alloy 20不锈钢薄板的焊接,焊接接头各项性能均能满足要求.关键词:Alloy 20;不锈钢薄板;等离子弧焊接;......
)Abstract:Stainless die with micro-groove and micro-hole have been designed and manufactured, which has been used to study superplastic microforming of 2091Al-Li alloy by means of superplastic forming... micro-rib specimen, behavior of material could be understood well.Key words:superplasticity; microforming; extrusion; 2091Al-Li alloy......
Trans. Nonferrous Met. Soc. China 22(2012) s656-s660 Microforming of superplastic 5083 aluminum alloy Md. Abu Mowazzem HOSSAIN1, Sung-Tae HONG1, Kyu-Yeol PARK1, Young-Sang NA2 1. School of Mechanical...: The mechanical behavior of superplastic 5083 aluminum alloy during microforming process was investigated by finite element analysis. A micro V-groove die was modeled to analyze the effects of forming......
Study on Thermomagnetic Treatment Fe-25.5Cr-12Co Permanent Magnetic Alloy Zhen Liang1,GAO Run-sheng2,ZHU Dan-yang1,SUN Xue-yin1,SHAO Wen-zhu1,XU Ren-gen1 (1.Technology and Development Centre... Fe-25.5Cr-12Co alloy by different process of thermomagnetic treatment were investigated. It is found that magnetic properties are sensitive to parameters of thermomagnetic treatment process in magnetic......
