共搜索到18619条信息，每页显示10条信息，共1862页。用时：0小时0分0秒323毫秒
AgCu4Ni0.3合金的内氧化动力学,组织结构和性能的研究王新建,王耀东,于磊,阮文魁,张利华摘 要:内氧化Ag基合金由于具有优良的导电性和导热性而成为一种重要的电接触材料.利用X射线衍射仪(XRD),光学显微镜(OM)和显微硬度仪对AgCu4Ni0.3合金在大气条件下,700℃时的内氧化行为,组织结构以及性能进行研究,并从热力学和动力学的角度对合金的内氧化机制进行了分析.研究结果表明,在700℃氧化8.5 h后,AgCu4Ni0.3合金的氧化层主要由CuO以及NiO所组成,并没有明显的Ag的氧化物形成.Cu,Ni元素在合金中发生了明显的选择性氧化.横截面形貌表明厚度为0.8 mm的AgCu4Ni0.3合金在大气退火8.5 h后已完全氧化,CuO和NiO颗粒均匀弥散分布于氧化层基体中.内氧化后合金的......
The Strengthening of Cu-15Ni-8Sn Alloy WANG Ming-Pu1,WANG Yan-hui1,HONG Bin1 (1.School of Material Science and Engineering, Central South University, Changsha China) 摘要:The microstructure, property and relation between them of Cu-15Ni-8Sn alloy are studied by means of TEM and the measurement of hardness. The results show that γ '' metastable phase strengthens alloy because of its ordering......
The Technological Improvements of Aluminum Alloy Coloring by Electrolysis LI Nai-jun1 (1.Teachers College, Shenyang University, Shenyang 110015, P. R. China) 摘要:The technological process of coloring golden-tawny on aluminum alloy by electrolysis was improved in this paper. The optimum composition of electrolyte was found, the conditions of deposition and anodic oxidation by electrolysis were......
Microstructure and Performances of Nanocrystalline Zinc-nickel Alloy Coatings LI Guang-yu1,NIU Li-yuan1,JIANG Zhong-hao1,LIAN Jian-she1 (1.The Key Lab of Automobile Materials, Ministry of Education, China, College of Materials Science and Engineering, Jilin University, Nanling Campus, Changchun, 130025, China) 摘要:Nanocrystalline zinc-nickel alloy coatings were deposited from an alkaline......
Alloy 20不锈钢薄板等离子弧焊接工艺研究赵斌,王宾宾,王小华中国船舶重工集团公司第七二五研究所摘 要:对Alloy 20不锈钢薄板进行了等离子弧焊接工艺试验研究.结果表明,采用等离子弧焊接方法,ERCr Ni Mo-3焊材及合理的焊接工艺参数,等离子弧焊接工艺可用于Alloy 20不锈钢薄板的焊接,焊接接头各项性能均能满足要求.关键词:Alloy 20;不锈钢薄板;等离子弧焊接;......
)Abstract:Stainless die with micro-groove and micro-hole have been designed and manufactured, which has been used to study superplastic microforming of 2091Al-Li alloy by means of superplastic forming... micro-rib specimen, behavior of material could be understood well.Key words:superplasticity; microforming; extrusion; 2091Al-Li alloy......
Trans. Nonferrous Met. Soc. China 22(2012) s656-s660 Microforming of superplastic 5083 aluminum alloy Md. Abu Mowazzem HOSSAIN1, Sung-Tae HONG1, Kyu-Yeol PARK1, Young-Sang NA2 1. School of Mechanical...: The mechanical behavior of superplastic 5083 aluminum alloy during microforming process was investigated by finite element analysis. A micro V-groove die was modeled to analyze the effects of forming......
Study on Thermomagnetic Treatment Fe-25.5Cr-12Co Permanent Magnetic Alloy Zhen Liang1,GAO Run-sheng2,ZHU Dan-yang1,SUN Xue-yin1,SHAO Wen-zhu1,XU Ren-gen1 (1.Technology and Development Centre... Fe-25.5Cr-12Co alloy by different process of thermomagnetic treatment were investigated. It is found that magnetic properties are sensitive to parameters of thermomagnetic treatment process in magnetic......
J. Cent. South Univ. (2018) 25: 1573-1581 DOI: https://doi.org/10.1007/s11771-018-3849-x Derivation and application of concentration formula of alloy genes of DO3-type in BCC alloy systems PENG... and Engineering, Central South University, Changsha 410083, China Central South University Press and Springer-Verlag GmbH Germany, part of Springer Nature 2018 Abstract: Taking Ta–W alloy system......
Thermostability of Al-Cu-Mg-Fe-Ni Alloy with Trace Scandium and Zirconium Yu Kun1,Li Songrui1,Li Wenxian1 (1.Department of Materials Science and Engineering, Central South University of Technology,Changsha 410083, P. R. China) 摘要:Three Al-Cu-Mg-Fe-Ni-Sc-Zr ingot metallurgy alloys with different compositions had been prepared. The hardness variations of cold-rolled alloy plates during annealing......
