共搜索到16246条信息，每页显示10条信息，共1625页。用时：0小时0分0秒671毫秒
......
Annealing behavior of rolled AZ31 alloy sheet PENG Wei-ping(彭伟平), LI Pei-jie(李培杰), ZENG Pan(曾 攀) Key Laboratory for Advanced Manufacturing by Materials Processing Technology, Tsinghua... to equiaxed grains with uniform and homogeneous structures. The changes of microstructure decreased the yield strength and enhanced the elongation. The analysis of XRD shows that the AZ31 alloy sheet......
Influence of rolling ways on microstructure and anisotropy of AZ31 alloy sheet CHEN Xing-pin(陈兴品)1, SHANG Du(尚 都)1, XIAO Rui(肖 睿)1, HUANG Guang-jie(黄光杰)1, 2, LIU Qing(刘 庆)1, 2 1. College... September 2009; accepted 30 January 2010 Abstract: Two rolling ways, unidirectional rolling and cross rolling, were carried out on twin roll cast AZ31 alloy sheet to study the influence of strain......
ARTICLE J. Cent. South Univ. (2019) 26: 1582-1591 DOI: https://doi.org/10.1007/s11771-019-4114-7 Influence of AZ31 sheet treated by cryogenic on punch shearing HU Zhi-qing(胡志清)1, 2, GUO Chao-fan(郭超... of CT on the properties of the magnesium alloy during punch shearing. In this work, the influence of AZ31 sheet treated by cryogenic on punch shearing was studied. Microstructures were observed......
Production of 150 cm wide AZ31 magnesium sheet by twin roll casting A. A. KAYA1, 2, O. DUYGULU1, S. UCUNCUOGLU1, G. OKTAY1, D. S. TEMUR1, O. YUCEL3 1. Materials Institute, TUBITAK MRC, Gebze...; Abstract: 150 cm wide AZ31 magnesium alloy sheet was produced by twin roll casting. The sheets of 6 mm thickness were cast......
sheet is refined from 13.2 μm processed by normal rolling to 8.9 μm processed by differential speed rolling; during the differential speed rolling, the grain size of AZ31 magnesium alloy sheet is refined... words: differential speed rolling; AZ31 magnesium alloy sheet; microstructure ......
Comparison of microstructure and properties of AZ31 Mg alloy sheet produced through different routes LUO Jin-ru(罗晋如)1, CHEN Xing-pin(陈兴品)2, XIN Ren-long(辛仁龙)2, HUANG Guang-jie(黄光..., efficiency and yield of the sheet. For instance, primary processing such as hot-rolling and hot-extrusion had been studied early in 1980s[2-3]; and equal channel angular pressing performed on an AZ31......
-yong, PENG Ying-hong (School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China) Abstract: The textures of both as-extruded rod and as-rolled sheet of AZ31 magnesium... that the major texture of as-extruded AZ31 rod is the fiber texture with (0001) basal plane parallel to the extrusion direction (ED), while the major texture of as-rolled AZ31 sheet is the basal texture......
Deformation behaviors of magnesium alloy AZ31 sheet in cold deep drawing YANG Lian-fa(杨连发)1, MORI Ken-ichiro2, TSUJI Hirokazu2 1. School of Electromechnical Engineering, Guilin University...: To investigate how the popular magnesium alloy AZ31 sheet (aluminum 3%, zinc 1%) behaves in cold working, deep drawing experiments at room temperature, along with finite element(FE) simulation,were performed......
-rolling AZ31 magnesium alloy sheet: (a) =0.000 3 s-1; (b) =0.03 s-1 图2 AZ31镁合金常规轧制板的真应力-真应变曲线 Fig.2 True stress-true strain curves of normal rolling AZ31 magnesium alloy sheet... 2 Strain rate sensitivity values of cast-rolling AZ31 magnesium alloy sheet deformed under different conditions (ε＝0.2) 表3 不同变形条件下AZ31常规轧制板的应变速率敏感系数 Table 3 Strain rate......
