共搜索到19737条信息，每页显示10条信息，共1974页。用时：0小时0分0秒523毫秒
Effect of united refining and modification on mechanical properties of A356 aluminium alloys ZUO Xiu-rong(左秀荣), ZHONG Zhi-guo(仲志国) Key Laboratory of Material Physics, Ministry of Education..., B, RE and Sr additions obtain the best mechanical properties in T6 treatment. Key words: A356 aluminium alloys; grain-refining aluminium alloys (GRAI); modification; refining; mechanical properties......
-alloying, and the LCF life is only influenced by Ti contents in the alloys. The A356 alloy with 0.10 %Ti has a lower yield strength, which exhibits a longer LCF life than the alloys with 0.14%Ti. Key..., CHEN D L. Cyclic deformation behavior of a cast aluminum alloy[J]. Materials Science and Engineering A, 2009, 516: 31-41. [2] 宋谋胜, 刘忠侠, 李继文, 宋天福, 王明星, 谢敬佩, 翁永刚. 加钛方式与钛含量对A356合金组织和性能的影响[J]. 中国有色金属学报......
Effect of pouring temperature on fractal dimension of primary phase morphology in semi-solid A356 alloy LIU Zheng(刘 政)1, 2, MAO Wei-min(毛卫民)3, LIU Xiao-mei(刘小梅)2 1. Jiangxi Nonferrous... in semi-solid A356 alloy prepared by low superheat pouring and slightly electromagnetic stirring were calculated, and the effect of pouring temperature on fractal dimension of primary phase......
Trans. Nonferrous Met. Soc. China 22(2012) 42-46 Eutectic modification of A356 alloy with Li addition through DSC and Miedema model CHEN Zhong-wei, MA Cui-ying, CHEN Pei State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an 710072, China Received 27 December 2010; accepted 21 April 2011 Abstract: Eutectic modification of A356 alloy with Li addition......
Trans. Nonferrous Met. Soc. China 23(2013) 605-615 Effect of process parameters on tensile strength of friction stir welded cast A356 aluminium alloy joints M. JAYARAMAN1, v. balasubramanian2 1... parameters on the tensile strength of cast A356 aluminium alloy. Joints were made using different combinations of tool rotation speed, welding speed and axial force. The quality of weld zone was analyzed......
recorded. Despite low α-Al2O3 content of the coating, the compact and nearly single layer nature of the coating guaranteed the excellent performances. Key words: A356 aluminium alloy; sodium aluminate..., showing that the microstructure is also determinative for the wear performance. 2 Experimental Small blocks of specimen were cut from a cast A356 aluminium alloy (a hypoeutectic Al-Si alloy) automotive......
Influence of serpentine channel pouring process parameters on semi-solid A356 aluminum alloy slurry CHEN Zheng-zhou, MAO Wei-min, WU Zong-chuang School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China Received 28 June 2010; accepted 8 October 2010 Abstract: Semi-solid A356 aluminum alloy slurry was prepared by using serpentine channel......
is responsible for the precipitation hardening of A356 aluminium alloy after T6 heat treatment [3]. In order to study the mentioned mechanism implicitly, microhardness test was done on α(Al) phase before...Trans. Nonferrous Met. Soc. China 26(2016) 956-965 Effect of various melt and heat treatment conditions on impact toughness of A356 aluminum alloy M. AMNE ELAHI, S. G. SHABESTARI Center of Excellence......
defects and fatigue strength of a die cast aluminium alloy: a comparison between standard specimens and production components[J]. International Journal of Fatigue, 2002, 24(1): 1-9. [2]Buffiere J Y... rate on the fatigue life of A356.2-T6 cast aluminium alloy[J]. Fatigue Fact Eng Mater Struct, 2000, 23: 417-423. [6]Wang Q G, Apelian D, Lados D A. Fatigue behavior of A356/357 aluminum cast alloys......
of the cooling ability of the serpentine channel on the semisolid microstructure was investigated. 2 Experimental The experimental work was conducted using a commercial A356 aluminium alloy... Preparation of semisolid A356 alloy slurry with larger capacity cast by serpentine channel YANG Xiao-rong1, MAO Wei-min2, SUN Bin-yu1 1. School of Materials Science and Engineering, Taiyuan......
