共搜索到9790条信息，每页显示10条信息，共979页。用时：0小时0分0秒511毫秒
Preparation of semi-solid slurry at power frequency by annulus electromagnetic stirring method BAI Yue-long(白月龙), XU Jun(徐 骏), ZHANG Zhi-feng(张志峰), SHI Li-kai(石力开) General Research... alloy; semi-solid; electromagnetic stirring; slurry preparation ......
Taper barrel rheomoulding process for semi-solid slurry preparation and microstructure evolution of A356 aluminum alloy ZHANG Fan(张 帆), KANG Yong-lin(康永林), YANG Liu-qing(杨柳青), DING Rui-hua(丁瑞华... rheomoulding (TBR) machine for light alloy semi-solid slurry preparation was introduced. The semi-solid slurry was obtained from the intense shearing turbulence of the alloy melt in the cause......
PREPARATION OF SEMI-SOLID AlSi7Mg ALLOY SLURRY W.M. Mao1,Z.D. Zhao1 (1.School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083,China) Abstract:In this article, semi-solid AlSi7Mg alloy slurry was prepared by low superheat pouring and weak electromagnetic stirring. The effects of pouring temperature and stirring power on the microstructure......
-Si-Mg-Fe alloy used in this study (mass fraction, %) 2.1 Preparation of semi-solid slurry The semi-solid slurry of the alloy was prepared using the gas induced...Trans. Nonferrous Met. Soc. China 20(2010) s857-s861 Effects of primary phase morphology on mechanical properties of Al-Si-Mg-Fe alloy in semi-solid slurry casting process R. BURAPA1, S......
PREPARATION STUDY OF SEMI-SOLID 60Si2Mn SPRING STEEL SLURRY W.M.Mao1,L.P.Zhang1,D.Yun1,X.Y.Zhong1,A.M.Zhao1 (1.University of Science & Technology Beijing, Beijing 100083, China) Abstract:The nondendritic semi-solid slurry preparation of 60Si2Mn spring steel is studied in this paper. The experiments show that when stirred for 2 minutes under the test condition, the semi-solid slurry with 50%-60......
May 2010; accepted 25 June 2010 Abstract: A computational model coupling an electromagnetic model with a macroscopic heat and fluid flow model in semi-solid aluminum alloy slurry preparation... flow model in semi-solid Al alloy slurry preparation by A-EMS was developed, where the influence of a three-pair-pole electromagnetic stirring on macroscopic transport phenomena during the solidification......
Semi-solid slurry preparation and rolling of 1Cr18Ni9Ti stainless steelWeimin Mao, Aimin Zhao, Dong Yun, Leping Zhang, and Xueyou ZhongMaterials Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China摘 要:<正> The preparation and rolling of the semi-solid slurry 1Cr18Ni9Ti stainless steel were researched......
Preparation of semi-solid slurry containing fine and globular particles for wrought aluminum alloy 2024 GUO Hong-min(郭洪民)1, YANG Xiang-jie(杨湘杰)2 1. School of Materials Science and Engineering... directly by component shaping and eliminating the high cost of special produced feedstock [10-12]. During rheoforming technique, the preparation of semi-solid slurry with spherical primary grains......
Preparation of semi-solid AlSi7Mg alloy slurry with big capabilityLI Sha and MAO Weimin School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China摘 要:Semi-solid AlSi7Mg alloy slurry was prepared by low superheat pouring and weak traveling-wave electromagnetic stirring.The effects of pouring temperature......
the preparation of the semi-solid slurry in A356 Al alloy using low superheat temperature and weak electromagnetic stirring, the certain extent of the forced convection with low intensity in the melt results... Effect of pouring temperature on semi-solid slurry of A356 Al alloy prepared by weak electromagnetic stirring LIU Zheng(刘 政) 1, 2, MAO Wei-min(毛卫民)1, ZHAO Zheng-duo(赵振铎)1 1......
