共搜索到3670条信息，每页显示10条信息，共367页。用时：0小时0分0秒458毫秒

• Variations of properties across plate thickness for Al alloy 7010

  来源： 《中国有色金属学报(英文版)2005年第6期》——M. Salazar-Guapuriche Y. Y. Zhao A. Pitman A. Greene

   Article ID: 1003-6326(2005)06-1258-06 Variations of properties across plate thickness for Al alloy 7010 M. Salazar-Guapuriche1, 2, Y. Y. Zhao2, A. Pitman3, A. Greene3 (1. Materials..., UK) Abstract: The variations of electrical conductivity and hardness across the thickness of an Al alloy 7010 plate under the temper condition T7651 were investigated. The electrical conductivity......

• Evaluation of straightening capacity of plate roll straightener

  来源： 《中南大学学报(英文版)2012年第9期》——王勇勤 刘志芳 严兴春

  J. Cent. South Univ. (2012) 19: 2477-2481  DOI: 10.1007/s11771-012-1299-4 Evaluation of straightening capacity of plate roll straightener WANG Yong-qin(王勇勤), LIU Zhi-fang(刘志芳), YAN Xing-chun(严兴... of the incoming plate and the plastic ratio. The mechanics model describing the capacity of the machine was developed. The deviation of the straightening capacity curves was studied. Then, the presented model......

• Shape model of multi-pass spray deposition plate

  来源： 《中国有色金属学报(英文版)1999年第4期》——张豪 陈振华 张荻

  ......

• Superplastic bulging capability of Ti-6Al-4V buttcover plate

  来源： 《中国有色金属学报(英文版)2002年第2期》——张凯锋 王刚 吴德忠 郑海荣 陈惠滨

  ......

• Boundary determination of leveling capacity for plate roller leveler based on curvature integration method

  来源： 《中南大学学报(英文版)2015年第12期》——LIU Zhi-fang LUO Yuan-xin YAN Xing-chun WANG Yong-qin

  Boundary determination of leveling capacity for plate roller leveler based on curvature integration methodLIU Zhi-fang(刘志芳)1, LUO Yuan-xin(罗远新)2, YAN Xing-chun(严兴春)2, WANG Yong-qin(王勇勤)2(1. College.... The typical ranges of the leveling capacity are expressed by several boundary curves which are helpful to judge whether the incoming plate can be leveled quickly or not. Also, these curves can be used......

• Edge effects of metal plate in laser forming

  来源： 《中国有色金属学报(英文版)2005年第z3期》——石永军 沈洪 姚振强 胡俊

  ......

• 轧制加工低合金板钢表面边部裂纹机制研究

  来源： 《钢铁2010年第12期》——徐震 华蔚 江来珠

  轧制加工低合金板钢表面边部裂纹机制研究徐震1,华蔚1,江来珠1(1.上海市宝钢股份有限公司)摘 要:通过"模铸+初轧"工艺轧制低合金钢锭时,钢板易在表面距边部100 mm左右易出现直线型裂纹,裂纹或深或浅,有规律,导致报废量大大增加,影响了正常生产.该类缺陷曾被认为是轧制缺陷,从宏观形貌及微观组织等多方面研究缺陷形成机制,判定源于钢锭表面内在和外在微裂纹缺陷,初轧轧制时轧件在受到拉应力最大的地方产生开裂,从而为产品质量改进提供了理论依据,通过采取有效的技术措施,大大减少了该类缺陷发生的几率. 关键......

• Improving behavior of semi-supported steel plate shear walls

  来源： 《中南大学学报(英文版)2019年第10期》——Ali GHAMARI Abbas AKBARPOUR Ali GHANBARI

  J. Cent. South Univ. (2019) 26: 2891-2905 DOI: https://doi.org/10.1007/s11771-019-4222-4 Improving behavior of semi-supported steel plate shear walls Ali GHAMARI1, Abbas AKBARPOUR2, Ali GHANBARI3 1...: In spite of the good performance of the steel plate shear wall (SPSW) in recent earthquakes and experimental studies, the need for huge columns to surround the infill plate is a major shortcoming......

• Manufacturing of ultra-large plate forgings by unfolding and flattening of thick cylinders

  来源： 《中南大学学报(英文版)2020年第8期》——温彤 邓正华 游建豪 杜康康 孙嫘

  J. Cent. South Univ. (2020) 27: 2227-2238 DOI: https://doi.org/10.1007/s11771-020-4444-5 Manufacturing of ultra-large plate forgings by unfolding and flattening of thick cylinders DENG Zheng-hua(邓正... Equipment Co. Ltd., Deyang 618000, China Central South University Press and Springer-Verlag GmbH Germany, part of Springer Nature 2020 Abstract: Ultra-large plate forgings are foundation of heavy......

• FEA technique of hot plate forming process using cell-typed die with cooling device

  来源： 《中国有色金属学报(英文版)2012年第3期》——Jung-Min LEE In-Kyu LEE Kyung-Hun LEE Dae-Soon KIM Byung-Min KIM

  Trans. Nonferrous Met. Soc. China 22(2012) s831-s837 FEA technique of hot plate forming process using cell-typed die with cooling device Jung-Min LEE1, In-Kyu LEE2, Kyung-Hun LEE2, Dae-Soon KIM3.... Industrial Technology Division, Hyundai Heavy Industries, Ulsan 682-792, Korea Received 21 May 2012; accepted 5 November 2012 Abstract: Hot plate forming using a cell-typed die is a process for forming......