共搜索到9450条信息，每页显示10条信息，共945页。用时：0小时0分0秒675毫秒
......
titanium alloy and 1.5 mm thick 2A12 aluminum alloy. As show in Figure 1, lap joints are used in spot welding (aluminum plate in the upper, titanium plate in the bottom), and welding position... and TC4 titanium alloy joints YANG Xia-wei(杨夏炜)1, FENG Wu-yuan(冯武渊)1, LI Wen-ya(李文亚)1, CHU Qiang(褚强)1,XU Ya-xin(徐雅欣)1, MA Tie-jun(马铁军)1, WANG Wei-bing(王卫兵)2 1. State Key Laboratory of Solidification......
Achieving superior mechanical properties in friction lap joints of copper to carbon-fiber-reinforced plastic by tool offsettingL.H.Wu,K.Nagatsuka,K.NakataJoining and Welding Research Institute, Osaka.... In this study, sound lap joints of Cu and CFRTP were obtained by friction lap joining(FLJ) directly at rotation rates of 600-2000 rpm, with the welding tool at the joint center and offsetting the tool 7......
......
Trans. Nonferrous Met. Soc. China 22(2012) 299-304 Interface characteristic of friction stir welding lap joints of Ti/Al dissimilar alloys CHEN Yu-hua, NI Quan, KE Li-ming National Defense Key Disciplines Laboratory of Light Alloy Processing Science and Technology,Nanchang Hangkong University, Nanchang 330063, China Received 11 February 2011; accepted 14 June 2011 Abstract: Lap joints of TC1 Ti......
of the new tools are believed to widen the welding region and improve the mixing action for oxide fragmentation and dispersal at the weld interface[6]. In particular, the lap joints using Skew-stir... welded lap joints [J]. Engineering Fracture Mechanics, 2007, 74: 468-450. [8] CEDERQVIST L, REYNOLDS A P. Factors affecting the properties of friction stir welded aluminum lap joints [J]. Weld J, 2001......
7050-T7451 single lap four-bolted joints was studied by highfrequency fatigue test and finite element(FE) methods. The fatigue test results showed that a better enhancement of fatigue life was achieved...Experimental and numerical investigations on fatigue behavior of aluminum alloy 7050-T7451 single lap four-bolted jointsXiaomei Liu1,Hao Cui1,Shangzhou Zhang1,Haipo Liu1,Shujun Li31. School......
="ChDivSummary" name="ChDivSummary">Friction stir welding(FSW)was performed to produce Al/Ti lap joints under various welding conditions.More heat was generated when rotational rate increased...Influence of welding parameters on interface evolution and mechanical properties of FSW Al/Ti lap jointsMingrun Yu1,2,Hongyun Zhao2,Zhihua Jiang2,Zili Zhang2,Fei Xu2,Li Zhou1,2,Xiaoguo Song1,21......
Trans. Nonferrous Met. Soc. China 29(2019) 1824-1835 Effect of tool tilt angle on strength and microstructural characteristics of friction stir welded lap joints of AA2014-T6 aluminum alloy C... a tool tilt angle of 1° to 3°. However, sound joints were welded using a tool tilt angle of 2°, which had the maximum lap shear strength of 14.42 kN and microhardness of HV 132. The joints welded using......
ARTICLE J. Cent. South Univ. (2019) 26: 1573-1581 DOI: https://doi.org/10.1007/s11771-019-4113-8 Corrosion behavior of dissimilar copper/brass joints welded by friction stir lap welding in alkaline..., part of Springer Nature 2019 Abstract: This study was done to evaluate the nugget zone (NZ) corrosion behavior of dissimilar copper/brass joints welded by friction stir lap welding (FSLW) in a solution......
