共搜索到7075条信息，每页显示10条信息，共708页。用时：0小时0分0秒621毫秒
and joining efficiency in the friction welding of hybrid Al2O3-reinforced aluminum composites were conducted. Metal matrix composites (MMCs) with 37% (volume fraction) aluminum particle were joined... decreases as the joining efficiency increases, while it is considered that the joining efficiency does not increase as the reduction rate of particle size decreases. During the macro-examination......
Article ID: 1003-6326(2005)06-1322-06 Effects of pyrolysis temperature and fillers on joining of ceramics via silicone resin SUO Jun(所 俊), CHEN Zhao-hui(陈朝辉), ZHENG Wen..., China) Abstract: The joining of graphite, ceramic SiC and Cf/SiC composites via preceramic silicone resin(SR) at high temperature (800-1400℃) was studied. The curing and pyrolysis process of SR......
......
......
; accepted 25 January 2015 Abstract: The joining of Mg alloy to steel was realized by metal inert-gas arc welding, and the weld thermal cycle characteristics and Mg-steel joints were investigated. The results... welding; dissimilar metal joining 1 Introduction Magnesium and its alloys have been suggested in transport applications to reduce the fuel consumption and environmental pollution, due to their unique......
Experimental investigation on atomization and collecting efficiency ofwind-spray dust controller and its parameters optimizationKOU Bao-fu(寇保福)1, LIU Qiu-zu(刘邱祖)1, CAO Shi-chen(曹世宸)2, HU Xiao-he(胡晓禾... of Science and Technology Beijing, Beijing 100083, China)Abstract:In order to enhance the atomization efficiency of atomizer, a new type of wind-spray dust controller combining the rotary-atomization......
Direct joining of oxygen-free copper and carbon-fiber-reinforced plastic by friction lap joiningL.H.Wu,K.Nagatsuka,K.NakataJoining and Welding Research Institute, Osaka University摘 要:Oxygen-free copper(Cu) was successfully joined to carbon-fiber-reinforced thermoplastic(CFRTP,polyamide 6 with 20 wt% carbon fiber addition) by friction lap joining(FLJ......
......
Semisolid joining of aluminum A356 alloy by partial remelting and mechanical stirring S. M. J. ALVANI1, H. AASHURI1, A. KOKABI1, R. BEYGI1 Materials Science and Engineering Department, Sharif... the localized semisolid zone during butt-joining is developed. Since the heat conductivity of this alloy is very high, the accurate controlling of temperature during joining must be considered. A gas heating......
A Hybrid Joining Technology for Aluminum/Zinc Coated Steels in VehiclesC.Y.Choi1,D.G.Nam3,Y.D.Kim1,Y.D.Park41. School of Materials Science and Engineering,Pusan National University,Busan3. Dongnam...">Currently,in the automotive industry,joining of the aluminum alloys with the steel is a crucial problem to be solved.Conventional joining techniques including resistance spot and gas metal arc welding......
