共搜索到10703条信息,每页显示10条信息,共1071页。用时:0小时0分0秒566毫秒
......
increase compared with that of the matrix. The size of alloying element and the vacuum degree are the key factors influencing the alloying layer, with the increase of element powder size from 0.074... investigation[13-15], aluminum powder was chosen as the alloying element. The research was conducted under different process parameters, the factors and process of surface alloying layer were......
......
J. Cent. South Univ. (2017) 24: 1551-1559 DOI: 10.1007/s11771-017-3560-3 Alloying effects of V on stability, elastic and electronic properties of TiFe2 via first-principles calculations NONG Zhi... University Press and Springer-Verlag Berlin Heidelberg 2017 Abstract: The alloying effects of V on structural, elastic and electronic properties of TiFe2 phase were investigated by the first-principles......
......
Effect of Alloying Element on Electromagnetic Interference Shielding Effectiveness of Binary Magnesium AlloysZhu Luo,Xian-Hua Chen,Kai Song,Chun-Quan Liu,Yan Dai,Di Zhao,Fu-Sheng PanCollege... shielding capacity of binary magnesium alloys decrease linearly with alloying element content.The electromagnetic shielding effectiveness of the binary magnesium alloys with the same alloying element......
effectively hinder dislocation and grain boundary sliding at elevated temperature. Generally, aluminum is an effective alloying element in magnesium alloys for improvement in room properties and hardness... at temperatures between 490 and 550 °C. The main alloying element Sn initiates the formation of Mg2Sn at 525 °C. The liquidus and solidus temperatures for A4 alloy (Fig.1(b)) are 629 and 538 °C......
......
surfaces. Dimples with the diameter of 150 μm and the depth of 30-35 μm distributed circumferentially on the disc surface. The alloying element Cr was sputtered to the laser texturing steel surface... to sputter Cr. The Cr plate (d 130 mm×5 mm) was used as the source electrode material for supplying the alloying element. Laser texturing steel disc was used as substrate materials......
......