共搜索到3746条信息,每页显示10条信息,共375页。用时:0小时0分0秒500毫秒
Abrasive wear property of laser melting/deposited Ti2Ni/TiNi intermetallic alloy GAO Fei(高 飞), WANG Hua-Ming(王华明) Laboratory of Laser Materials Processing and Manufacturing, School of Materials... matrix was fabricated by the laser melting deposition manufacturing process. Wear resistance of Ti2Ni/TiNi alloy was evaluated on an abrasive wear tester at room temperature under the different loads......
J. Cent. South Univ. (2020) 27: 356-371 DOI: https://doi.org/10.1007/s11771-020-4301-6 Influence of abrasive hardness on erosion wear of abrasive air jets LIU Yong(刘勇)1, 2, CHEN Chang-jiang(陈长江)1...-ping, LIU Xiao-tian, WANG Xiang-dong. Influence of abrasive hardness on erosion wear of abrasive air jets [J]. Journal of Central South University, 2020, 27(2): 356-371. DOI: https://doi.org......
Effect of Pearlite Interlamellar Spacing on Predominant Abrasive Wear Mechanism of Fully Pearlitic Steel M. Monirvaghefi1,M. Salehi1,J. Ahmadi2,B.Niroumand1 (1.Isfahan University of Technology... roles, but study of surface and debris shows that with decreasing interlamellar spacing, the predominant mechanism wear changed from ploughing to cutting mode. 关键词:three-body abrasive wear......
resistance. The integration of dispersedly distributed carbides, lath martensite and residual austenite of the surface layer results in satisfactory wear resistance. 关键词:Surfacing welding; Abrasive...Microstructure and Abrasive Mechanism of Surfacing Welding Based on TiC-VC Particle LOU Song-nian1,LU Xue-qin1,ZOU Zeng-da2,YANG Shang-lei3 (1.Institute of Welding, Shanghai Jiaotong University......
Abrasive wear characteristics and mechanisms of Al2O3/PA1010 composite coatingsJIA Xian, and LING Xiaomei1) Department of Science and Technology, University of Science and Technology Beijing, Beijing... wear characteristics of Al2O3/PA1010 composite coatings on the surface of quenched and low-temperature temper steel 45 were tested on the template abrasive wear testing machine and the same uncoated......
concentration, and abrasive size on the wear performance and fatigue life of the mild steel workpiece were obtained. MITTAL et al [9] performed abrasive flow machining on SiC metal matrix composites (MMCs.... [8] CHERIAN J, ISSAC J M. Effect of process parameters on wear performance in abrasive flow machining [J]. Applied Mechanics & Materials, 2015, 766-767: 661-667. DOI: 10.4028/www.scientific.net......
Characteristics and mechanism of abrasive wear for thermoplastic polymersXian Jiu, and Xiaomei Ling1)Department of Science and Technology, University of Science and Technology Beijing, Beijing 100083, China2) Department of Analytical Chemistry, School of Pharmaceutical Science, Peking University, Beijing 100083, China摘 要:<正> Abrasive wear......
approach [J]. Wear, 1999, 231(2): 242-248. [18] JAIN R K, JAIN V K, DIXIT P M. Modeling of material removal and surface roughness in abrasive flow machining process [J]. International Journal... G K. Forces prediction during material deformation in abrasive flow machining [J]. Wear, 2006, 260(1/2): 128-139. [24] Bouncing putty. http://www.charliekao.com.tw/[EB/OL]. Charlie- Kao Industry Co......
. Analysis of surface texture generated by a flexible magnetic abrasive brush [J]. Wear, 2005, 259(7-12): 1254-1261. [8] JAIN V K, KUMAR P, BEHERA P K, JAYWAL S C. Effect of working gap and circumferential speed in the performance of magnetic abrasive finishing process [J]. Wear, 2001, 250(1-12): 384-390. [9] YANG L D, LIN C T, CHOW H M. Optimization in MAF operations using Taguchi parameter design......
affect the wear rate. The dominant wear mechanisms under the test condition are abrasion and plastic deformation. Key words: Mg-Y-Gd-Zn alloy; wear behavior; wear rate; sliding wear; abrasive wear 1... (3 N, as shown in Fig. 6(a)), the abrasive wear process results in the loss of fine debris particles, and these particles are less than 10 μm. With increasing applied load (15 N, as shown in Fig. 6(b......