共搜索到6451条信息，每页显示10条信息，共646页。用时：0小时0分0秒671毫秒
The woven fiber micromechanics model MESOTEX [7-8] was employed to study the effects of geometry on the mechanical properties of woven fabric composites. The micromechanics model employed classical..., it is concluded that the model was coded correctly. Table 1 Simulation results of E-glass plane woven fabric/ vinylester composites 2.2 Fiber volume fraction The fiber volume fraction in a repeating unit cell......
Effect of Twisted Fiber on Flexural Property and Microstructure of Woven Fabric Reinforced Composite杜建华1,赵晓琳1,2,YANG Hongwei1,JIA Chengchang2,GAO Heng3,WANG Dafeng2,Lü Yingying21. Department... flexural strength of 2.5D deep bend-joint structure twisted fiber and original fiber woven fabric composites were 176.66 MPa and 204.45 MPa, respectively. The results of the characteristics indicated......
chloride and polyvinylidene fluoride (PVC-PVCF) on the surface of base fabrics [12]. The base fabric, woven by polyester fiber yarns in warp and fill directions, is the main part that determines mechanical... J. Cent. South Univ. (2019) 26: 2569-2577 DOI: https://doi.org/10.1007/s11771-019-4195-3 Reinforcement by polyurethane to stiffness of air-supported fabric formwork for concrete shell construction......
permittivity; pyrolytic coating; Al2O3 fiber fabric 1 Introduction Growth of interest in stealth technology applied to reducing the radar cross-section surface of military vehicles has promoted... Trans. Nonferrous Met. Soc. China 22(2012) 354-359 Influence of pyrolytic carbon coatings on complex permittivity and microwave absorbing properties of Al2O3 fiber woven fabrics DING Dong-hai, ZHOU......
were fabricated using carbon fabric reinforced epoxy. T300 fibers were used for the laminates. The fiber content of the composite laminates was 58%-62%. The laminates were produced using a vacuum bag... Influence of voids on interlaminar shear strength of carbon/epoxy fabric laminates ZHU Hong-yan(朱洪艳)1, LI Di-hong(李地红)1, ZHANG Dong-xing(张东兴)1, WU Bao-chang(吴宝昌)2, CHEN Yu-yong(陈玉勇)1......
仿真；力学性能 中图分类号:TB323 文献标识码:A 文章编号:1672-7207(2007)02-0200-06 Fiber fabric 3D simulation and influence...: The continuous carbon fiber reinforced silicon carbide (C/SiC) composites were studied, and the fiber fabric 3D simulation software developed. The 2.5D fiber fabric and 3D4Dr fiber fabric C/SiC composites......
Effect of Nano-silica Modification on the Tensile Property of SMA/GF/CF/Epoxy Super Hybrid Woven Fabric Composites赵世成1,梁文彦1,WANG Zhenqing1,LEI Hongshuai21. College of Aerospace and Civil Engineering...(GF) and carbon(CF) woven fabric reinforced epoxy matrix super hybrid composites were investigated, respectively. In order to enhance the mechanical strength of this advanced material, two categories......
溶液浸渍法制备Al2O3陶瓷布的研究 宋哲男1,王立生1,郭志猛1,郭敏1 (1.北京科技大学,北京,100083) 摘要:以棉布和粘胶纤维布作为前驱体布,采用溶液浸渍法制备了Al2O3陶瓷布.采用扫描电子显微镜,X射线衍射研究了不同工艺对Al2O3陶瓷布显微结构和成分的影响.结果表明:采用棉布及粘胶纤维布均能制得Al2O3陶瓷布,其纤维纹理与前驱体布织物结构保持一致;随着烧结温度升高,显微组织越愈加致密,纤维断裂程度减小,烧结应在900-1000℃进行. 关键词:溶液浸渍法; Al2O3陶瓷布; 烧结温度; 前驱体布; [全文内容正在添加中] ......
J. Cent. South Univ. (2020) 27: 2003-2016 DOI: https://doi.org/10.1007/s11771-020-4426-7 Mechanical properties of fiber and cement reinforced heavy metal-contaminated soils as roadbed filling HUANG... and cements as an effective method to treat heavy metal contaminated soil (HMCS). The objective of this paper is to investigate the effects of fiber content, fiber length, cement content, curing time, heavy......
. School of Textiles, Tianjin Polytechnic University, Tianjin 300160, China; 2. Tianjin Municipal Key Lab of Fiber Modification and Functional Fiber, Tianjin Polytechnic University, Tianjin 300160, China... towards the same bacteria. After washing for 50 times, the antibacterial performances of the treated fabric still remains at a relatively high level, indicating the durable characteristic of nano TiO2......
