图书来源:二元合金相图及中间相晶体结构 二元合金相图及中间相晶体结构
作 者:唐仁政 田荣璋
出版时间:2009-05
定 价:320元
图书ISBN:978-7-81105-831-4
出版单位:中南大学出版社
Shude JI 1) , Aili ZOU 1) , Yumei YUE 1) , Guohong LUAN 2) , Yanye JIN 1) and Fu LI 1) 1) Faculty of Aerospace Engineering, Shenyang Aerospace University, Shenyang 110136, China 2) Beijing Aeronautical Manufacturing Technology Research Institute, Beijing 100024, China
摘 要:The rotational tool is put forward, which is composed of the one-spiral-flute shoul-der and the rotational pin with screw. Using the turbulent model of the FLUENT software, material plastic flow behavior during the process of friction stir welding of Ti6Al4V alloy is researched by the numerical simulation method and then the effect of rotational tool geometry on material flow during the welding process is attained. The results show that the flow direction of the material near the rotational tool is mainly the same as the rotational direction of the tool while the material near tool flows more violently than the other regions. For the tapered rotational pin, the flow velocity of material inside the workpiece decreases with the increase of the distance away from the workpiece surface because of the change of pin diameter. For the rotational tool, the flute added to the shoulder and the screw added to the pin can greatly increase the flow velocity of material during the welding process while the peak value of the flow velocity of material appears on the flute or the screw. Moreover, the rotational tool with the one-spiral-flute shoulder is better than the tool with the concentric-circles-flute shoulder. Decreasing the width of pin screw and increasing the diameter of pin tip are both good for the increase of flow velocity.
关键词: