简介概要

定向凝固镍基高温合金DZ125平界面生长的微观组织演化

来源期刊:金属学报2010年第9期

论文作者:闵志先 沈军 王灵水 冯周荣 刘林 傅恒志

文章页码:1075 - 1080

关键词:镍基高温合金; 定向凝固; 微观组织; 溶质分布

Key words:Ni-based superalloy; directional solidification; microstructure; solute distribution

摘    要:采用液态金属冷却(LMC)定向凝固技术,对镍基高温合金DZ125在凝固速率为1.5μm/s的条件下其平界面生长的微观组织演化规律进行了研究.结果表明:凝固组织演化经历3个不同的阶段,当凝固分数fs≤0.26时,为单相γ组织,基体中零星分布着细小的颗粒状的未熔HfC;当0.26<fs<0.86时,为γ/MC共生组织,MC为纤维状或者板片状;当fs≥0.86时,为γ/γ′共晶组织和分布于其中的粗大块状MC.EPMA结果表明:Al,Ti,Ta和Mo含量随fs的增大而增大;而W,Cr和Co含量随fs的增大而减小.分析指出,凝固组织转变是由于溶质再分配产生的宏观溶质分布不均匀造成的.

Abstract: By using liquid metal cooling method,the Ni-based superalloy DZ125 was directionally solidified under planar interface growth condition of drawing rate of 1.5μm/s.The microstructures at different solidified fractions were examined by OM and SEM.The results showed that the solid/liquid interface is planar and the microstructure evolution undergoes three stages:the γ phase was formed as solidified fraction (fs) was not more than 0.26,and the fine HfC phase sparsely distributed in γ matrix;the coupled γ/MC growth appeared as fs ranged from 0.26 to 0.86,and the morphology of MC was fibrous or plate-like shapes;the γ/γ’ eutectic was obtained as fs was more than and equaled 0.86 0.86,in which the octahedral MC was precipitated simultaneously.EPMA was used to determine the solute distribution along the longitudinal direction of the sample.The contents of Al,Ti,Ta and Mo increased with fs increasing,while the contents of W,Cr and Co decreased.The analysis showed that the microstructure transformation is attributed to macro-scale non-uniform solute distribution which resulted from solute redistribution during directional solidification.

详情信息展示

定向凝固镍基高温合金DZ125平界面生长的微观组织演化

闵志先1,沈军1,王灵水1,冯周荣1,刘林1,傅恒志1

(1.陕西省西安市西北工业大学凝固技术国家重点实验室)

摘 要:采用液态金属冷却(LMC)定向凝固技术,对镍基高温合金DZ125在凝固速率为1.5μm/s的条件下其平界面生长的微观组织演化规律进行了研究.结果表明:凝固组织演化经历3个不同的阶段,当凝固分数fs≤0.26时,为单相γ组织,基体中零星分布着细小的颗粒状的未熔HfC;当0.26<fs<0.86时,为γ/MC共生组织,MC为纤维状或者板片状;当fs≥0.86时,为γ/γ′共晶组织和分布于其中的粗大块状MC.EPMA结果表明:Al,Ti,Ta和Mo含量随fs的增大而增大;而W,Cr和Co含量随fs的增大而减小.分析指出,凝固组织转变是由于溶质再分配产生的宏观溶质分布不均匀造成的.

关键词:镍基高温合金; 定向凝固; 微观组织; 溶质分布

<上一页 1 下一页 >

相关论文

  • 暂无!

相关知识点

  • 暂无!

有色金属在线官网  |   会议  |   在线投稿  |   购买纸书  |   科技图书馆

中南大学出版社 技术支持 版权声明   电话:0731-88830515 88830516   传真:0731-88710482   Email:administrator@cnnmol.com

互联网出版许可证:(署)网出证(京)字第342号   京ICP备17050991号-6      京公网安备11010802042557号