Preparation and Mechanical and Thermal Properties of Chlorinated Polyethylene Reinforced Polypropylene Foam
来源期刊：Journal Of Wuhan University Of Technology Materials Science Edition2018年第2期
论文作者：张伟 夏茹 苏丽芬 RUAN Fang ZHENG Zhengzhi MIAO Jibin YANG Bin QIAN Jiasheng
文章页码：500 - 504
摘 要：The foamed polypropylene（PP） with excellent mechanical and thermal insulating properties was reinforced by blending chlorinated polyethylene（CPE）, followed by compression molding foaming in cross-link. The effects of CPE on the foaming behavior, thermal and mechanical properties of the foamed PP were studied by the measurements of density, thermal conductivity, Vicat softening temperature, tensile strength, impact strength and SEM. The results showed that the foamed PP got the best properties when the weight ratio of CPE/PP was 20 wt%. The density of the obtained foamed PP was as low as 0.37 g/cm3, the impact strength was 16.5 kJ/m2, the tensile strength was 17.7 MPa, the thermal conductivity was 0.035 W/（m·K）, and the Vicat softening temperature was 112 ℃.
张伟1，夏茹1，苏丽芬1,2，RUAN Fang1，ZHENG Zhengzhi1，MIAO Jibin1，YANG Bin1，QIAN Jiasheng1
1. Anhui Province Key Laboratory of Environment-friendly Polymer Materials,School of Chemistry and Chemical Engineering,Anhui University2. Key Laboratory of Renewable Energy,Chinese Academy of Sciences
摘 要：The foamed polypropylene（PP） with excellent mechanical and thermal insulating properties was reinforced by blending chlorinated polyethylene（CPE）, followed by compression molding foaming in cross-link. The effects of CPE on the foaming behavior, thermal and mechanical properties of the foamed PP were studied by the measurements of density, thermal conductivity, Vicat softening temperature, tensile strength, impact strength and SEM. The results showed that the foamed PP got the best properties when the weight ratio of CPE/PP was 20 wt%. The density of the obtained foamed PP was as low as 0.37 g/cm3, the impact strength was 16.5 kJ/m2, the tensile strength was 17.7 MPa, the thermal conductivity was 0.035 W/（m·K）, and the Vicat softening temperature was 112 ℃.
关键词：
