IMPROVEMENT OF TYPE IV CRACKING RESISTANCE OF 9Cr HEAT RESISTING STEEL WELDMENT BY BORON ADDITION
来源期刊：Acta Metallurgica Sinica2004年第4期
论文作者：T.Watanabe F.Yin M.Kondo M.Tabuchi F.Abe H.Hongo
Key words：high Cr heat resistant steel; welded joint; boron addition; TypeIV fracture;
Abstract: Creep lives of high Cr ferritic heat resisting steel weldments decrease due to Type IV fracture, which occurs as a result of formation and growth of creep voids and cracks on grain boundaries in fine-grained heat affected zone (HAZ). Because boron is considered to suppress the coarsening of grain boundary precipitates and growth of creep voids, we have investigated the effect of boron addition on the creep properties of 9Cr steel weldments. Four kinds of 9Cr3W3CoVNb steels with boron content varying from 4.7×10-5 to 1.8×10-4 and with nitrogen as low as 2.0×10-5 were prepared.The steel plates were welded by gas tungsten arc welding and crept at 923K. It was found that the microstructures of HAZ were quite different from those of conventional high Cr steels such as P91 and P92, namely the fine-grained HAZ did not exist in the present steel weldments. Boron addition also has the effect to suppress coarsening of grain boundary carbides in HAZ during creep. As a result of these phenomena,the welded joints of present steels showed no Type IV fractures and much better creep lives than those of conventional steels.
T.Watanabe1，F.Yin1，M.Kondo1，M.Tabuchi1，F.Abe1，H.Hongo1
(1.National Institute for Materials Science, Tsukuba, Ibaraki 305-0047, Japan)
Abstract:Creep lives of high Cr ferritic heat resisting steel weldments decrease due to Type IV fracture, which occurs as a result of formation and growth of creep voids and cracks on grain boundaries in fine-grained heat affected zone (HAZ). Because boron is considered to suppress the coarsening of grain boundary precipitates and growth of creep voids, we have investigated the effect of boron addition on the creep properties of 9Cr steel weldments. Four kinds of 9Cr3W3CoVNb steels with boron content varying from 4.7×10-5 to 1.8×10-4 and with nitrogen as low as 2.0×10-5 were prepared.The steel plates were welded by gas tungsten arc welding and crept at 923K. It was found that the microstructures of HAZ were quite different from those of conventional high Cr steels such as P91 and P92, namely the fine-grained HAZ did not exist in the present steel weldments. Boron addition also has the effect to suppress coarsening of grain boundary carbides in HAZ during creep. As a result of these phenomena,the welded joints of present steels showed no Type IV fractures and much better creep lives than those of conventional steels.
Key words:high Cr heat resistant steel; welded joint; boron addition; TypeIV fracture;
【全文内容正在添加中】
