Low-temperature Rapid Synthesis of Ultrafine Hafnium Carbide Ceramic Powders
来源期刊:Journal Of Wuhan University Of Technology Materials Science Edition2018年第4期
论文作者:吴洁 王为民 LIU Chun
文章页码:843 - 848
摘 要:Nano hafnium carbide(HfC) powders were synthesized by sol-gel combining hightemperature rapid heat treatment process using citric acid and hafnium tetrachloride as the raw materials. The effects of ball milling treatment on the phase and morphology of pyrolysis products(HfO2-C) and final HfC product were investigated and the influences of heat treatment temperature and holding time on the structure and properties of the synthesized hafnium carbide powders were also studied. The experimental results showed that the HfO2-C powders with good uniformity and small particle size were prepared by controlling the milling time. Pure HfC powders with an average particle size of 500 nm were obtained at 1 700 ℃ with a holding time of 3 min, and the oxygen content was about 0.69 wt%, lower than that of the hafnium carbide powders prepared by SPS(0.97%).
吴洁,王为民,LIU Chun
State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology
摘 要:Nano hafnium carbide(HfC) powders were synthesized by sol-gel combining hightemperature rapid heat treatment process using citric acid and hafnium tetrachloride as the raw materials. The effects of ball milling treatment on the phase and morphology of pyrolysis products(HfO2-C) and final HfC product were investigated and the influences of heat treatment temperature and holding time on the structure and properties of the synthesized hafnium carbide powders were also studied. The experimental results showed that the HfO2-C powders with good uniformity and small particle size were prepared by controlling the milling time. Pure HfC powders with an average particle size of 500 nm were obtained at 1 700 ℃ with a holding time of 3 min, and the oxygen content was about 0.69 wt%, lower than that of the hafnium carbide powders prepared by SPS(0.97%).
关键词: