钛微合金化Q345E钢的试验研究
来源期刊:钢铁钒钛2010年第2期
论文作者:王建锋 邓深 饶江平 李光强 张峰
文章页码:20 - 25
关键词:Q345E; 钛; 微合金化钢; 细晶强化
Key words:Q345E; titanium; microalloyed steel; fine-grain strengthening
摘 要:采用钛微合金化技术生产出具有较高屈服强度和良好低温冲击韧性的Q345E钢,其组织均以铁素体+珠光体+少量回火索氏体组成。缓冷和快冷试验结果表明钛微合金化Q345E具有较高的性能稳定性,强度增加主要是Ti细晶强化及沉淀强化作用引起的,研究为钛微合金化钢的进一步推广作了有益尝试。
Abstract: The high performance Q345E steel with high yield strength and stable low-temperature impact toughness was made by Titanium microalloying technology.The microstructure of developed Q345E steel is composed of ferrite,pearlite and a little tempered sorbite.Slow cooling and fast cooling experimental results showed that titanium microalloyed Q345E steel has high performance stability,the increase of strength is caused mainly by grain-refining strengthening and precipitation strengthening.This research is a beneficial attempt for further promotion of titanium microalloyed steel.
王建锋1,邓深1,饶江平1,李光强1,张峰1
(1.湖北省武汉市武汉科技大学钢铁冶金及资源利用省部共建教育部重点实验室)
摘 要:采用钛微合金化技术生产出具有较高屈服强度和良好低温冲击韧性的Q345E钢,其组织均以铁素体+珠光体+少量回火索氏体组成。缓冷和快冷试验结果表明钛微合金化Q345E具有较高的性能稳定性,强度增加主要是Ti细晶强化及沉淀强化作用引起的,研究为钛微合金化钢的进一步推广作了有益尝试。
关键词:Q345E; 钛; 微合金化钢; 细晶强化