边部覆盖率板形测量值计算模型
来源期刊:钢铁2009年第10期
论文作者:刘佳伟 张殿华 王鹏飞 王军生
文章页码:51 - 56
关键词:板形辊; 覆盖率; 边部检测; 冷轧
Key words:shape meter roll; overlapping degree; edge measurement; cold rolling
摘 要:在板形测量系统中,板形辊边部传感器受力状态与覆盖率大小有直接关系。为了得到准确的板形测量值,通过研究接触式BFI板形辊的板形检测原理,分析了边部传感器在带钢张力作用下的受力状态,推导出了边部覆盖率数学模型,并成功应用于1450连轧机上。研究结果表明,该模型用于BFI板形仪板形测量系统中,实现了边部板形精确测量。
Abstract: In flatness measurement system,meter sensors at the edge of shape have the direct relation between forced condition and the coverage fraction size.In order to obtain the accurate shape of strip measurement value,the strip measurement theory of the BFI shape meter were studied and the sensors at tension condition were analyzed.The overlapping degree mathematical expression is deduced.Furthermore,this model was success used in 1450 tandem mill.The results show that this model was used in the BFI strip shape measurement system and realized the precise shape of strip measurement at edge.
刘佳伟1,张殿华1,王鹏飞1,王军生2
(1.辽宁省沈阳市东北大学轧制技术及连轧自动化国家重点实验室
2.鞍钢股份有限公司,辽宁鞍山 114001)
摘 要:在板形测量系统中,板形辊边部传感器受力状态与覆盖率大小有直接关系。为了得到准确的板形测量值,通过研究接触式BFI板形辊的板形检测原理,分析了边部传感器在带钢张力作用下的受力状态,推导出了边部覆盖率数学模型,并成功应用于1450连轧机上。研究结果表明,该模型用于BFI板形仪板形测量系统中,实现了边部板形精确测量。
关键词:板形辊; 覆盖率; 边部检测; 冷轧