应用有限元模拟研究退火温度对超低碳烘烤硬化钢力学性能的影响

来源期刊：上海金属2011年第2期

论文作者：王华 史文 刘鹏鹏 李麟

文章页码：32 - 35

关键词：ANSYS/LS-DYNA； 有限元模拟； 超低碳烘烤硬化钢； 拉伸试验； 力学性能

Key words：ANSYS/LS-DYNA； Finite Element Modeling； Ultra Low Carbon Bake Hardening Steel； Tensile Experiments； Mechanical Property

摘    要：对超低碳烘烤硬化钢在740℃到800℃之间进行退火,通过拉伸试验获得试样的力学性能。利用有限元软件ANSYS/LS-DYNA对试样的拉伸过程进行模拟并验证模拟过程的可行性,同时也解释了拉伸过程中出现的非正常断裂现象。对拉伸过程正常断裂试样的模拟及试验结果计算获得合适的模拟参数。模拟结果显示,拉伸过程中非正常断裂的退火试样应在中间位置断裂,其延伸率相比其他试样并没有很大的突变。认为有限元模拟可以对超低碳烘烤硬化钢的拉伸行为的预测起到一定指导作用。

Abstract: The ultra low carbon bake-hardening steels were annealed within the temperature from 740 ℃ to 800 ℃.The tensile experiments were carried out to detect the mechanical properties of samples.FEM software of ANSYS/LS-DYNA was employed to simulate the tensile processes,so as to verify the validity of the software as well as explain the appearance of un-normal rupturing.During the simulation,the reliable parameters were obtained by simulation and calculated date of the normal ruptured samples.Simulation results showed that the sample ruptured in the central region of parallel zone,and that the engineering elongation of it was reasonable compared with that of the other samples.It was indicated that the finite element modeling was useful to investigate the mechanical properties of bake hardening steels.