冷却速度对锻造TiAl基合金组织演变的影响
来源期刊:中南大学学报(自然科学版)1999年第2期
论文作者:唐建成 黄伯云 谢鲲 王健农 贺跃辉
文章页码:59 - 61
关键词:TiAl基合金;冷却速度;组织演变
Key words:TiAl based alloy; cooling rate; microstructure evolution
摘 要:利用光学显微镜,研究了冷却速度对锻造Ti-48Al-2Cr(原子数分数,%)组织演变的影响.结果表明:冷却速度主要影响锻造TiAl基合金组织演变产物的形貌,而对晶团尺寸的影响较小.锻造TiAl基合金在α相转变温度θα以上等温热处理后,采用炉冷、空冷、油冷和水冷,会依次转变为全层状组织、层状组织加魏氏体组织、块状转变组织加魏氏体组织、块状转 变组织加羽毛状组织.
Abstract: The effect of cooling rate on the microstructure evolution of a forged TiAl based alloy was investigated through optical microscope. The results show that cooling rate affected the morphology of the microstructure of a forged TiAl based alloy, but had little influence on the colony size. When the alloys, that were isothermally heat treated at temperatures above the alpha transus , were cooled in furnace, air, oil and water, the following products were observed respectively: fully lamellar structure, lamellar structure and widmanstatten structure, massive transformation structure and widmanstatten structure, massive transformation structure and feathery structure.