Fabrication of micro gear wheels by micropowder injection molding

Haiqing Yin, Xuanhui Qu, and Chengchang Jia School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China

摘 要：The micropowder injection molding technology was investigated to fabricate the microsized gear wheels on a conventional injection molding machine. The feedstock comprised of carbonyl ferrum powder and a wax-based thermoplastic binder. Microinjection molding was fulfilled at about 423 K under 100 MPa. The heating system was applied to the die to improve the fluidity of the feedstock and subsequently the cooling system was used to enhance the strength of the green compacts after injection by decreasing the temperature of the die. The gear wheels were realized successfully with their addendum circle diameter ranging from 800 to 200 μm and with the center hole as small as 60 μm.

关键词：