G3镍基耐蚀合金管材热挤压工艺润滑行为研究 Ⅱ.玻璃润滑剂黏度-成分计算方法及应用
来源期刊:金属学报2011年第3期
论文作者:林奔 王宝顺 张麦仓 董建新
文章页码:374 - 379
关键词:镍基合金; 热挤压; 玻璃润滑剂; 黏度
Key words:nickel-based alloy; hot extrusion; glass lubricant; viscosity
摘 要:基于经典的玻璃性质-组成加和法则,建立了G3镍基合金热挤压润滑剂用硼硅酸盐玻璃黏度-成分计算方法,采用该计算方法对10种组元含量不同的硼硅酸盐玻璃的黏度特性进行了预测.结果发现预测值与实验结果吻合较好,表明该计算方法是可靠的.因此,采用本文建立的计算方法,可以反向设计玻璃的成分,使玻璃黏度性质满足G3镍基合金玻璃润滑热挤压工艺中对玻璃黏度性质的要求,从而为热挤压工艺中的玻璃润滑剂设计和制备提供理论依据.
Abstract: Based on the classical first-order mixture method which describes the relationship between the property value and component,a modified mixture method for predicting the viscosity property of borosilicate glass lubricant used in the hot extrusion of G3 alloy was established.Then, the viscosity properties of 10 different borosilicate glasses were predicted using this method.The viscosity data predicted by this calculation method coincided well with the experimental data,which showed that the calculation model was of strong reliability.Therefore,according to this model,the glass composition could be reversely designed,which will assure the viscosity of glass to meet the requirements of glass lubricated hot extrusion of G3 alloy which has been raised in the first article.It provides theoretical guidance for the design and preparation of glass lubricant in the glass lubricated hot extrusion of G3 alloy.
林奔1,王宝顺1,张麦仓1,董建新1
(1.北京市北京科技大学材料科学与工程学院)
摘 要:基于经典的玻璃性质-组成加和法则,建立了G3镍基合金热挤压润滑剂用硼硅酸盐玻璃黏度-成分计算方法,采用该计算方法对10种组元含量不同的硼硅酸盐玻璃的黏度特性进行了预测.结果发现预测值与实验结果吻合较好,表明该计算方法是可靠的.因此,采用本文建立的计算方法,可以反向设计玻璃的成分,使玻璃黏度性质满足G3镍基合金玻璃润滑热挤压工艺中对玻璃黏度性质的要求,从而为热挤压工艺中的玻璃润滑剂设计和制备提供理论依据.
关键词:镍基合金; 热挤压; 玻璃润滑剂; 黏度