Microstructure, mechanical properties, and corrosion resistance of Mg–9Li–3Al–1.6Y alloy
来源期刊：Rare Metals2016年第5期
论文作者：Hao-Miao Yang Nan-Yi Zhang Na Liu Wei-Dong Xie Xiao-Dong Peng
文章页码：374 - 379
摘 要：Mg–9Li–3Al–1.6Y alloys were prepared through mixture method. The microstructure, mechanical properties, and corrosion resistance of the as-cast and asextruded alloys were studied by optical microscopy（OM）,scanning electronic microscopy（SEM）, X-ray diffraction（XRD）, mechanical properties testing, and electrochemical measurement. The as-cast Mg–9Li–3Al–1.6Y alloy with the average grain size of 325 lm is composed of b-Li matrix, block a-Mg, and granule Al2Y phases. After extrusion, the grain size of the as-cast alloy is obviously refined and reaches to 75 lm; the strength and elongation of the extruded alloy are enhanced by 17.20 % and49.45 %, respectively, owing to their fine microstructure and reduction of casting defects. The as-extruded alloy shows better corrosion resistance compared to the as-cast one, which may be related to the low stored energy and dislocation density in the extruded alloy, also the homogenization treatment before extrusion.
Hao-Miao Yang1，Nan-Yi Zhang1，Na Liu2，Wei-Dong Xie1，Xiao-Dong Peng1
1. College of materials Science and Engineering, Chongqing University2. School of Physics & Electron Engineering, Yangtze Normal University
摘 要：Mg–9Li–3Al–1.6Y alloys were prepared through mixture method. The microstructure, mechanical properties, and corrosion resistance of the as-cast and asextruded alloys were studied by optical microscopy（OM）,scanning electronic microscopy（SEM）, X-ray diffraction（XRD）, mechanical properties testing, and electrochemical measurement. The as-cast Mg–9Li–3Al–1.6Y alloy with the average grain size of 325 lm is composed of b-Li matrix, block a-Mg, and granule Al2Y phases. After extrusion, the grain size of the as-cast alloy is obviously refined and reaches to 75 lm; the strength and elongation of the extruded alloy are enhanced by 17.20 % and49.45 %, respectively, owing to their fine microstructure and reduction of casting defects. The as-extruded alloy shows better corrosion resistance compared to the as-cast one, which may be related to the low stored energy and dislocation density in the extruded alloy, also the homogenization treatment before extrusion.
关键词：
