CaO掺杂对10NiO-NiFe2O4复合陶瓷烧结致密化的影响
来源期刊:中国有色金属学报2006年第8期
论文作者:赖延清 张勇 张刚 李劼 贺跃辉 黄伯云 刘业翔
文章页码:1355 - 1360
关键词:10NiO-NiFe2O4复合陶瓷; CaO掺杂; 惰性阳极; 铝电解; 致密化
Key words:10NiO-NiFe2O4 composite ceramics; CaO doping; inert anode; aluminum electrolysis; densification
摘 要:采用冷压-烧结技术制备了CaO掺杂的10NiO-NiFe2O4复合陶瓷, 研究了CaO掺杂量及烧结温度对10NiO-NiFe2O4复合陶瓷物相组成、 显微结构及致密度的影响。 结果表明:当CaO掺杂量为0~4%(质量分数)时,烧结样品中主要含有NiO和NiFe2O4两种, CaO与10NiO-NiFe2O4陶瓷组分反应并形成低熔点相,且Ca2+离子固溶到基体组分中, 促进致密化烧结, 降低了烧结温度;当CaO掺杂量为4%时, 过剩的CaO存在于陶瓷颗粒间, 抑制了致密化过程的进行; 于1 200 ℃烧结时, 2%CaO掺杂样品的相对密度最大, 达到98.75%,比未掺杂样品的相对密度提高近24%; 当烧结温度从1 200当升高到1 400 ℃时, CaO掺杂量为0、 0.5%和1.0%的样品相对密度提高20%以上, 但当CaO掺杂量为2%和4%时, 陶瓷样品相对密度反而下降, 且晶粒明显长大。 附件:(2006)08-1355-06
Abstract: The CaO doped 10NiO-NiFe2O4 composite ceramics were prepared with the cold isostatic pressing-sintering process, the effects of CaO content and sintering temperature on the phase composition, microstructure and density of 10NiO-NiFe2O4 composite ceramics were studied. The results show that the samples are mainly consisted of NiO and NiFe2O4 when content of CaO is 0-4%(mass fraction), CaO reacts with the component of 10NiO-NiFe2O4 ceramics and forms low melting point phase, and Ca2+ dissolves into the ceramic base, which is important to accelerate the sintering densification and reduce sintering temperature. When sintered at 1 200 ℃, the samples doped with 2% CaO have the maximum relative density(98.75%), which increases about 24% compared with the undoped samples. When the CaO content is 4%, the excessive CaO indwelling between the base ceramic grains restrains the densification of 10NiO-NiFe2O4 composite ceramics. When the sintering temperature rises from 1 200 to 1 400 ℃, the relative density of the samples doped with 0, 0.5% and 1% CaO increase 20%, but the relative densities of the samples doped with 2% and 4% CaO decrease and the grains coarsen obviously.
基金信息:湖南省自然科学基金资助项目